Dynamisk autostartsekvens: Effektivisering av stenkrossdrift genom en anpassningsbar autostartksekvens
2025 (Swedish)Independent thesis Basic level (professional degree), 10 credits / 15 HE credits
Student thesis
Abstract [sv]
Detta arbete har genomförts med ett syfte på att utveckla en dynamisk autostartskevens i mjukvaran CodeSys, samt koppla denna till användarvänligt HMI-gränssnitt.
Målet var att öka flexibiliteten i systemet och förbättra felsökningsprocessen för serviceteknikerna, samtidigt som opertörerna skulle få möjligheten att anpassa sekvensen efter olika behov, utan att behöva omprogrammera PLC:n.
Genom intervjuer med servicetekniker identiferades brster i de befintliga systemet, särskilt avsaknaden av larmhantering och svårigheten att anpassa maskinen till olika maskinvarianter. Den nya lösningen löste dessa problem genom att implementera funktioner som dynamisk aktivering/inaktivering av objekt, inställning av maxtider och visuell larminidering via HMI.
systemet testades genom simulering, och resulatet har visa den nya sekvensen uppfyllde majorititeten av de krav som ställs från både tekniker och företag.
Abstract [en]
This work was carried out with the aim of developing a dynamic autostart sequence in the software CodeSys and connecting it to a user-friendly HMI interface. The goal was to increase the flexibility of the system and improve the troubleshooting process for service technicians, while also giving operators the ability to adapt the sequence to different needs without having to reprogram the PLC.
Through interviews with service technicians, shortcomings in the existing system were identified, particularly the lack of alarm handling and the difficulty of adapting the machine to different hardware variants. The new solution addressed these issues by introducing features such as dynamic activation/de- activation of objects, setting maximum times, and visual alarm indication via the HMI.
The system was tested through simulation, and the results showed that the new sequence fulfilled the majority of the requirements from both technicians and the company.
Place, publisher, year, edition, pages
2025. , p. 35
Keywords [en]
PLC, Human Machine Interface(HMI), ST, CFC, FB, sequence.
Keywords [sv]
PLC, Human Machine Interface (HMI), ST, CFC, FB, sekvens.
National Category
Other Electrical Engineering, Electronic Engineering, Information Engineering
Identifiers
URN: urn:nbn:se:miun:diva-55400OAI: oai:DiVA.org:miun-55400DiVA, id: diva2:1993146
Subject / course
Electrical Engineering ET2
Educational program
Automationsingenjör TAUMG 180 GR
Supervisors
Examiners
2025-08-292025-08-292025-09-25Bibliographically approved