Applicering av SMED vid hyvelomställning: en fallstudie inom Lean tillverkning hos Vida Alvesta AB
2025 (Swedish)Independent thesis Basic level (professional degree), 10 credits / 15 HE credits
Student thesisAlternative title
Application of SMED during planer changeover: a case study in Lean manufacturing at Vida Alvesta AB (English)
Abstract [en]
The following case study carried out an application of the lean tool Single Minute Exchange of Die (SMED) to optimize changeovers at Vida Alvesta AB. Part lists and part time were collected by taking measurements during real changeovers. The reduction of changeover time was also presented through the increase of Overall Equipment Efficiency (OEE), as the reduction of downtime results in an increase of the actual amount produced. The planing mill was optimized by comparing a pre-SMED and post-SMED approach. The post-SMED approach resulted in optimizing the changeover times by introducing more parallel work. The optimization resulted in 71.62 hours per year being saved by introducing more parallel work when changing the planer. The reduction in downtime also resulted in an increase in OEE of 2.1%, which would mean an increase of 4082 cubic meters.
Abstract [sv]
Följande fallstudie genomförde en applicering av lean-verktyget Single Minute Exchange of Die (SMED) för att optimera omställningarna hos Vida Alvesta AB. Momentlistor och momenttider samlades in genom att genomföra mätningar under verkliga omställningstillfällen. Minskningen av omställningstid presenterades även med en ökning av Overall Equipment Efficiency (OEE). Eftersom minskandet av stopptid resulterar i ökad andel verklig producerad mängd. Hyvleriet optimerades genom att ett tillvägagångsätt innan och efter SMED samanställdes. Tillvägagångsättet efter SMED gav resultatet att omställningstiderna kunde optimeras genom att införa en större del parallellt arbete. Optimeringen resulterade i att 71,62 timmar per år kunde sparas genom att införa mer parallellt arbete vid omställning av hyveln. Minskningen av stopptid resulterade även i en ökning av OEE med 2,1%, vilket skulle motsvara en ökning med 4082 kubikmeterproducerad vara.
Place, publisher, year, edition, pages
2025. , p. 63
Keywords [en]
Single Minute Exchange of Die (SMED); Overall Equipment Efficiency (OEE); Changeovers; Planing; Optimization; Approach
Keywords [sv]
Single Minute Exchange of Die (SMED), Overall Equipment Efficiency (OEE), Omställningar, Hyvleri, Optimering, Tillvägagångsätt
National Category
Industrial engineering and management
Identifiers
URN: urn:nbn:se:lnu:diva-141259OAI: oai:DiVA.org:lnu-141259DiVA, id: diva2:1992203
Educational program
Industrial Engineering and Management, 180 credits
Presentation
2025-06-04, 10:00 (Swedish)
Supervisors
Examiners
Note
Projekt: Hållbart byggande med trä – materialeffektivt värdeskapande från trämaterial till byggnader
2025-09-032025-08-262026-01-15Bibliographically approved