Digitala Vetenskapliga Arkivet

Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Concrete with sustainable fillers at elevated temperatures: A review
Luleå University of Technology, Department of Civil, Environmental and Natural Resources Engineering, Structural and Fire Engineering.ORCID iD: 0009-0005-3959-6803
Luleå University of Technology, Department of Civil, Environmental and Natural Resources Engineering, Structural and Fire Engineering.ORCID iD: 0000-0002-8682-876X
Luleå University of Technology, Department of Civil, Environmental and Natural Resources Engineering, Structural and Fire Engineering.ORCID iD: 0000-0002-5474-1512
2025 (English)In: Cement & Concrete Composites, ISSN 0958-9465, E-ISSN 1873-393X, Vol. 164, article id 106232Article, review/survey (Refereed) Published
Abstract [en]

Fillers such as fly ash, slag, and biochar offer potential solutions for addressing carbon emissions from cement manufacturing and improving waste management. However, concrete with fillers experiences severe thermal damage at elevated temperatures due to issues like thermal incompatibility, pore pressure build-up, thermal stress, and phase transformation. This paper offers a comprehensive review of how fly ash, slag, and biochar impact concrete when subjected to high temperatures. It reviews phase stability, alterations in microstructure, thermal damage, and mechanical behaviour, as well as approaches to improve concrete's fire resistance. Fly ash and slag reduce microcracks in concrete during heat exposures by consuming free portlandite (Ca (OH)2) during cement hydration, while biochar mitigates pore pressure in the matrix. However, fillers lower concrete's thermal conductivity, increasing temperature gradients and reducing fire resistance. A mix of steel and polypropylene fibers enhances fire resistance more effectively than using a single fiber type.

Place, publisher, year, edition, pages
Elsevier Ltd , 2025. Vol. 164, article id 106232
Keywords [en]
Fillers, Elevated temperatures, Phase transformation, Microstructure, Mechanical performance, Fibers
National Category
Other Materials Engineering Building materials
Research subject
Structural Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-114325DOI: 10.1016/j.cemconcomp.2025.106232ISI: 001545281600001Scopus ID: 2-s2.0-105012245483OAI: oai:DiVA.org:ltu-114325DiVA, id: diva2:1989671
Funder
Swedish Research Council Formas, 2022–00676
Note

Validerad;2025;Nivå 2;2025-08-18 (u5);

Full text license: CC BY 4.0;

Available from: 2025-08-18 Created: 2025-08-18 Last updated: 2026-06-10Bibliographically approved
In thesis
1. Biochar for the Development of Low-Carbon Concrete
Open this publication in new window or tab >>Biochar for the Development of Low-Carbon Concrete
2026 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

Biochar demonstrates strong decarbonization potential in concrete but significantly affects workability. To address this and to better understand the effects of biochar on concrete, as well as its role in decarbonizing it, this study applied a volumetric water-to-binder ratio (w/b), replacing cement with biochar powder at 5%, 10%, and 20% by volume, and compared the results with a 5% weight-based replacement. Additionally, prewetted biochar aggregate was used to replace sand at 30%, 60%, and 100% by volume. Various properties were assessed, including rheology, mechanical strength, hydration products, fire resistance, and carbon emissions of the concrete.

For biochar powder used as a cement replacement, the results indicate that the volumetric w/b ratio effectively improved workability and enhanced internal curing, leading to increased hydration products and improved mechanical performance compared to weight-based replacement. Despite a lower cement content, the 10% volumetric biochar sample achieved higher strength than the 5% weight-based sample. Biochar used as a sand replacement in concrete can better enhance internal curing and increase the degree of hydration due to improved moisture retention from the larger replacement volumes compared with its use as a cement replacement. Furthermore, replacing sand with biochar aggregate effectively reduces total shrinkage due to improved internal curing. Total shrinkage at 28 days was reduced by 41%, 55%, and 65% for 30%, 60%, and 100% biochar aggregate replacement levels, respectively.

Regarding fire resistance, both types of biochar increased the temperature gradients in concrete during heating. However, biochar aggregate contributed to a greater increase due to its higher volume and sand replacement ratio than biochar powder, which intensified thermal damage and, at 400 °C, even offset the benefits of accelerated cement hydration.

Due to energy recovery and carbon sequestration, wood biochar replacing 20% of cement reduced concrete carbon emissions by 42%, while fruit biochar replacing 100% of crushed sand reduced emissions by 167%, indicating that the concrete can become an effective carbon sink. However, carbon emissions should not be the sole consideration. Wood biochar used as a cement replacement reduced 56-day compressive strength by 3%, 6%, and 13% at 5 vol%, 10 vol%, and 20 vol%, respectively. Similarly, when fruit biochar replaced sand, the 56-day compressive strength decreased by 7%, 21%, and 47.4% at 30 vol%, 60 vol%, and 100 vol%, respectively.

Place, publisher, year, edition, pages
Luleå: Luleå University of Technology, 2026
Series
Doctoral thesis / Luleå University of Technology, ISSN 1402-1544
Keywords
Biochar, Rheology, Hydration, Decarbonization, Fire resistance.
National Category
Structural Engineering
Research subject
Fire Technology
Identifiers
urn:nbn:se:ltu:diva-118138 (URN)978-91-8142-091-3 (ISBN)978-91-8142-091-3 (ISBN)
Public defence
2026-10-02, A117, Luleå University of Technology, Luleå, 10:00 (English)
Opponent
Supervisors
Funder
Swedish Research Council Formas, 2022-00676
Available from: 2026-06-10 Created: 2026-06-10 Last updated: 2026-09-11Bibliographically approved

Open Access in DiVA

fulltext(20987 kB)264 downloads
File information
File name FULLTEXT01.pdfFile size 20987 kBChecksum SHA-512
7bff2700e07e211416e79b838cefb5f288079e60fbec6ddcea10f695706bb0bee9b363b73b57977f2f58e7b56b6bff22c0853bc22ae725abdace20a3e4a30329
Type fulltextMimetype application/pdf

Other links

Publisher's full textScopus

Search in DiVA

By author/editor
Wang, DongSas, GabrielDas, Oisik
By organisation
Structural and Fire Engineering
In the same journal
Cement & Concrete Composites
Other Materials EngineeringBuilding materials

Search outside of DiVA

GoogleGoogle Scholar
Total: 266 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 1244 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf