The demand for green and sustainable energy sources is steadily increasing in rate with the increasing energy usage. A promising solution for this problem is hydrogen production by water electrolysis. Anion exchange membrane water electrolysis (AEMWE) is a form of zero gap electrolyser that uses low cost and earth abundant materials to produce hydrogen. This thesis investigates the development of a standardized testing protocol for an AEMWE cell. It investigates the operating conditions as well as the influence of key components affecting the cell performance. The resulting protocol will be used in studying materials used as electrocatalysts as well as evaluating the performance of the membrane electrode assembly (MEA). By testing the cell under varying operating conditions such as temperature, flow rate, pressure and KOH concentration, optimal operating parameters were found. In addition to this, protocol steps were incorporated to improve the activity of the MEA, such as conditioning and stressing. The final operating conditions landed in a flow rate of 1 ml/min, a temperature between 60 ◦C to 80 ◦C, a bolt torque of 3.5 Nm and an electrolyte concentration of 1M KOH. It is used together with a testing protocol that includes membrane conditioning and stressing, impedance and stability tests along with polarization curves in order to evaluate the performance of the cell.