Microthrusters can provide propulsion capabilities for the increasing number of miniaturized satellites which, through the reduction in costs and lead times, contributes to the availability of space-dependent services such as imaging and communication. Due to the increase in surface-to-volume ratio that comes with size reduction, heat losses severely affect the performance of monopropellant hydrogen peroxide microthrusters. The aim of this study was to explore heat losses from a sub-mN microthruster by experimental firing tests supported by numerical modelling, the latter taking interfacing into account, which has rarely been done before. In addition, the degree of decomposition in the thruster was, for the first time, quantified using spectroscopic measurements on a condensate of the exhaust gases. Close to full decomposition, with residual concentrations down to 3-6 wt % only, was obtained for propellant flow rates of 10-20 μl/min using a screen-printed Pt catalytic bed. Visible smoke in the exhaust was correlated with incomplete decomposition, whereas transparent exhaust did not ensure the opposite, showing the importance of actual concentration measurements rather than relying on visual observations only. Modelling revealed that more than 75 % of the heat was lost through the thin wires used for electrical interfacing of the thruster, stressing the importance of including interfaces in heat transfer calculations for this type of thrusters.