Dragning av raka glasrör till fokuserande kapillärer: Utveckling av produkt för produktion av fokuserande kapillärer för användning med UV-ljus
2025 (Swedish)Independent thesis Basic level (professional degree), 10 credits / 15 HE credits
Student thesisAlternative title
Pulling of straight glass rods into focusing capillaries (English)
Abstract [sv]
Målet med det här projektet är att ta fram en produkt för att kunna dra ut raka glasrör till fokuserande kapillärer. De fokuserande kapillärerna kommer sedan användas för att transportera och fokusera UV-ljus i vakuum.
För att ta fram en produkt som klarar det behövdes först en litteraturstudie och intervju genomföras för att samla in kundbehov. Behoven kunde sedan bearbetas om till produktkrav. Utifrån produktkraven togs ett antal koncept fram. Ett av koncepten valdes ut för att vidareutvecklas till en färdig modell i CAD. Produkten består av undergrupperna ram, dragningsanordning, rotering av glasrör och brännare. Ramen är byggd likt en ställning och alla andra delar är fästa på den. Dragningen utförs av tre kulskruvar som drivs av en motor och är sammankopplade av en drivrem. I båda änderna av glasröret så roteras det med hjälp av varsin stegmotor som är direkt kopplad till chuckarna. Brännaren drivs på gasol och har en rund öppning som är riktad inåt direkt mot glasröret.
Produkten togs fram praktiskt genom verkstadsarbete med svarv och fräs och genom inköp av standardkomponenter. En första prototyp av produkten kunde genomgå ett fåtal tester för att bekräfta den teoretiska modellen. Utifrån resultaten av testerna bör produkten klara av att möta alla produktkrav, men mer testning behövs.
Abstract [en]
The goal of this project is to develop a product that can pull straight glass tubes into focusing capillaries. The focusing capillaries will be used to transport and focus UV-light in vacuum.
To develop a product that meets the requirements a literature study and interview to gather customer needs was conducted. The data gathered from that then got processed and turned into a product specification. From the product specification multiple concepts were developed. One of the concepts got chosen and further developed into a model in CAD. The product consists of the subgroups frame, pulling mechanism, rotation of glass tubes and burner. The frame keeps all the other parts connected and secure. The pulling is performed by three ballscrews driven by a single motor and connected by a drive belt. At both ends of the glass tube it is rotation using a stepper motor directly connected to the chuck. The burner is powered by propane and has a round opening directly angled towards the glass tube.
The product got developed practically through work in a workshop with a mill and lathe and through the purchase of standard components. A first prototype was made and then put through a few tests. Based on the result the product should be able to meet all product requirement, but mote testing is necessary.
Place, publisher, year, edition, pages
2025. , p. 40
Keywords [sv]
Glas, glasrör, produktutveckling, prototyputveckling, praktisk framtagning, kapillär
National Category
Other Mechanical Engineering Mechanical Engineering
Identifiers
URN: urn:nbn:se:uu:diva-562631ISRN: UTH-INGUTB-EX-M-2025/005-SEOAI: oai:DiVA.org:uu-562631DiVA, id: diva2:1979902
External cooperation
MB Scientific AB
Educational program
Bachelor Programme in Mechanical Engineering
Supervisors
Examiners
2025-07-022025-07-012025-07-02Bibliographically approved