Development of a Process Automation Lab: Modeling, Control, and ABB 800xA Integration for a Multitank System
2025 (English)Independent thesis Advanced level (professional degree), 20 credits / 30 HE credits
Student thesis
Abstract [en]
This thesis presents the development of a process automation laboratory that integrates a lab-scale multitank system with the ABB 800xA distributed control platform. The goal is to create a testbed for designing, testing, and validating advanced control strategies. A physics-based model of the process was developed and calibrated through experimental parameter identification to create a digital twin. Although significant variability was observed in actuator behavior, a model representing the average system dynamics was constructed to support simulation and control development. The digital twin was implemented within the ABB 800xA platform, and OPC UA communication with the physical system was established, enabling control and testing on both the simulated and real systems. The platform features an operator interface with alarm handling, historical data logging, and shutdown protocols to ensure safe operation of the physical process. Linear models were developed for three operating points: low (25 %), middle (50 %), and high (75 %) levels, from analytical derivations and black-box modeling via the N4SID subspace identification algorithm. An internal decentralized PID controller, developed inside ABB 800xA, and an external centralized MPC, developed in MATLAB, were implemented and evaluated on both the digital twin and the physical process. As expected for a MIMO system, the MPC outperformed the PID. The MPC still exhibited some steady-state errors on the real system compared to the digital twin, along with large fluctuations in the control signals to maintain the level set points. This highlights the importance of a physical process automation lab, where hardware variability presents more challenging control problems than working in simulation alone. The lab developed on the ABB 800xA platform proved a practical testbed bridging the simulation and real-world implementation gap.
Place, publisher, year, edition, pages
2025. , p. 97
Series
UPTEC F, ISSN 1401-5757 ; 25059
Keywords [en]
Process automation lab, ABB 800xA, Multitank, Modeling, MIMO, MPC, Decentralized PID
National Category
Control Engineering
Identifiers
URN: urn:nbn:se:uu:diva-562371OAI: oai:DiVA.org:uu-562371DiVA, id: diva2:1978383
External cooperation
ABB Corporate Research Center
Educational program
Master Programme in Engineering Physics
Supervisors
Examiners
2025-06-302025-06-272025-06-30Bibliographically approved