Utdragbart skyddshölje för elkabeln på skogsmaskin
2024 (Swedish)Independent thesis Basic level (professional degree), 10 credits / 15 HE credits
Student thesisAlternative title
Extendable protective sleeve for electric cable of forest machine (English)
Abstract [sv]
Komatsu Forest strävar hela tiden mot att göra krankörningen mer automatiserad, detta för att avlasta föraren och göra maskinen mer effektiv. En del i detta är hos Komatsu benämnt Smart Crane. Denna funktion har med hjälp av givare kontroll på kranspetsens position. Idag saknas vinkelgivare på rotatorn, som sitter i kranspetsen, samt givare på timmergripen. För att kunna ta den informationen från vinkelgivaren och givaren i timmergripen in till hytten behöver en elkabel dras fram till kranspetsen. Syftet med projektet var att designa ett skyddshöljesystem för elkabeln som kan ta upp längdförändringar för att undvika kabelbrott.
En kravspecifikation arbetades fram i ett tidigt skede av projektet. Utifrån kravspecifikationen kunde totalt tre olika koncept tas fram. Ett koncept vidareutvecklades och olika lösningar för konceptet presenterades. Det slutgiltiga konceptet består av två olika fjädermekanismer som dämpar ut längdförändringarna upp till ca 36 mm och en skyddsslang som inte tillåts flexa likt hydraulslangarna som går bredvid. Med den nuvarande designen kommer konceptet kunna ta upp de längdförändringar som förväntas uppstå. Utifrån detta projekt har Komatsu Forest ett koncept att vidareutveckla och utvärdera. Konceptet uppfyller nio av tio krav som sattes upp i kravspecifikationen.
Abstract [en]
Komatsu Forest continuously strives to automate crane operations to alleviate the operator's workload and enhance machine efficiency. As part of this effort, Komatsu has introduced the Smart Crane feature, which utilizes sensors to monitor the crane tip's position. Currently, angle sensors are absent on the rotator, located in the crane tip, as well as sensors on the timber grapple. To relay this information from the angle sensor and the timber grapple sensor to the cab, an electrical cable needs to be extended to the crane tip. The purpose of the project is to design a protective casing system for the electric cable that can accommodate length changes to prevent cable breakage.
A requirement specification was developed in the initial stage of the project. Based on the requirement specification, a total of three different concepts could be developed. One concept was further developed, and various solutions for the concept were presented. The final concept consists of two different spring mechanisms that dampen the length changes up to 36 mm and protective hose that does not allow flexing like the hydraulic hoses adjacent to it. With the current design, the concept will be able to accommodate the length changes that may occur. Based on this project, Komatsu Forest has a concept to further develop and evaluate. The concept meets nine out of ten requirements set in the requirement specification.
Place, publisher, year, edition, pages
2024. , p. 31
National Category
Mechanical Engineering
Identifiers
URN: urn:nbn:se:umu:diva-228356OAI: oai:DiVA.org:umu-228356DiVA, id: diva2:1888230
External cooperation
Komatsu Forest
Subject / course
Maskinteknik
Educational program
Bachelor of Science Engineering in Mechanical Engineering
Supervisors
Examiners
2024-08-142024-08-122024-08-14Bibliographically approved