Design of a Method to Improve 5G Indoor Positioning Accuracy Using Sensor Fusion with an IMU and Floor Map Information
2024 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE credits
Student thesisAlternative title
Design av en metod för att förbättra 5G inomhuspositioneringsnoggrannhet med hjälp av sensorfusion med en IMU och planritningsinformation (Swedish)
Abstract [en]
Indoor positioning is gaining interest with the surge of Industry 4.0 and the Internet of Things. This thesis focuses on sensor fusion techniques to improve the accuracy of radio-based indoor positioning systems. The main aim of this work is to increase the accuracy of a commercial 5G indoor positioning system by fusing information from an IMU and the indoor floor map. This is a challenging problem that implies taking into consideration several factors. Some of them are the way the position measurements are obtained, the effect of multipath propagation, the errors, biases, and drifts in each of the sensors, and the time synchronization and sampling frequency of all the devices involved. The proposed sensor fusion algorithm is a particle filter adapted to use the information of the sensors. The indoor positioning system’s measurements will be loosely coupled, while the IMU’s measurements will be tightly coupled. The IMU information is used to displace the particle filter’s particles according to the movement of the robot. The floor map is used to identify and filter out position measurement outliers, as well as to adapt the measurement model used in the particle filter. The performance was measured by comparing it to a ground truth obtained through a lidar-based SLAM algorithm. The results obtained showed a significant improvement in accuracy with respect to the position measurements from the commercial system. The particle filter offered better performance than an extended Kalman filter with access to IMU and floor map information. This is assumed to be caused by the non-Gaussian distribution of positioning errors caused by multipath propagation.
Abstract [sv]
Intresset för inomhuspositionering har ökat i och med introduktionen av Industry 4.0 och Internet of Things. Denna avhandling fokuserar på sensorfusionstekniker för att förbättra noggrannheten hos radiobaserade inomhuspositioneringssystem. Huvudsyftet med detta arbete är att öka noggrannheten hos ett kommersiellt 5G inomhuspositioneringssystem genom att kombinera information från en IMU och planritningen över rummet. Detta är ett utmanande problem som innebär att man tar hänsyn till hur positionsmätningarna erhålls, effekten av flervägsutbredning, felen, drift och avvikelser i sensorerna, samt tidssynkroniseringen och samplingsfrekvensen för alla inblandade enheter. Den föreslagna sensorfusionsalgoritmen är ett partikelfilter anpassat för att använda informationen från sensorerna. Inomhuspositioneringssystemets mätdata är löst kopplade, medan IMUs sensordata är tätt kopplade. IMUinformationen används för att uppdatera partiklarna enligt robotens rörelse. Planritningen används för att identifiera och filtrera bort positionsmätningar, samt för att anpassa mätmodellen som används i partikelfiltret. Prestandan mättes genom att jämföra den med referensposition erhållen genom en lidar-baserad SLAM-algoritm. De erhållna resultaten visade en signifikant förbättring i noggrannhet med avseende på positionsmätningarna från det kommersiella systemet. Partikelfiltret gav bättre prestanda än ett utökat Kalman-filter med tillgång till IMU och planritningsinformationen. Detta antas bero på den icke-Gaussiska fördelningen av positioneringsfelen orsakade av flervägsutbredning.
Place, publisher, year, edition, pages
2024. , p. 76
Series
TRITA-EECS-EX ; 2024:61
Keywords [en]
Indoor positioning, Sensor fusion, Inertial measurement unit, Floor map, Particle filter, 5G
Keywords [sv]
Inomhuspositionering, Sensorfusion, Tröghetsmätning, Planritning, Partikelfilter, 5G
National Category
Electrical Engineering, Electronic Engineering, Information Engineering
Identifiers
URN: urn:nbn:se:kth:diva-351568OAI: oai:DiVA.org:kth-351568DiVA, id: diva2:1887797
External cooperation
Telefonaktiebolaget LM Ericsson
Subject / course
Power Electronics
Educational program
Master of Science in Engineering - Electrical Engineering
Supervisors
Examiners
2024-08-122024-08-092024-08-12Bibliographically approved