As train speeds increase to transport passengers quicker across Sweden, the existingrailway bridge network must be verified for the greater vertical accelerations imposedby faster trains. As future railways are being built, understanding the effects thatparameters have on the acceleration response is of importance. The aim of this thesisis to perform a parametric study on end-shield bridges, including the soil-structureinteraction (SSI), when exposed to large dynamic loads.To conduct the parametric study, a script capable of generating arbitrary 2D bridgegeometries was created. To analyze the response of the bridges, frequency responsefunctions were generated for each bridge and the associated acceleration responseenvelopes were created. These envelopes were generated by simulating train passagesusing the the high speed load model. The script was verified against a 3D model withgood frequency matching but with damping error present. The SSI was first calculatedusing distributed springs and dashpots, and then represented using impedancefunctions. The parameters studied were: number of spans, the height between theend-shield and bedrock, end-shield size, and beam ratios.Single span bridges met the dynamic requirement set forth by governing standards.Three span bridges failed this criteria for a beam ratio of 15 and a span length lessthan 22 meters. In the single span case, larger end-shields outperformed smaller endshields, and a deeper bedrock foundation helped the end-shields dissipate vibrations from the structure. For the three span case, the presence of an end-shield reduced the acceleration but a greater height to bedrock had little effect.