Three-dimensional (3D) cell culture facilitates development of biological relevant assays for drug screening and toxicity testing. Compared to conventional 2D cell culture, cells cultured in 3D can more accurately mimic human tissues and organs and thus provide ex vivo data with potentially better predictive value for cancer research, pharmacology, and toxicology, reducing the need for animal models, improving experimental reproducibility, and reducing time and costs in drug development. The most widely used options for scaffold-based 3D cell culture are, however, based on poorly defined biologically derived extracellular matrix (ECM) with limited possibilities to tailor material properties and that are difficult to combine with state-of-the art biofabrication techniques.   

The overall aim this thesis was to design and explore modular hyaluronan (HA) based ECM-mimicking hydrogels with tuneable physiochemical properties and biofunctionalities, for development of advanced 3D cell models and biofabrication. The thesis work is presented in five papers. In paper I, we used copper free click chemistry for both hydrogel cross-linking and functionalization with fibronectin derived peptide sequences for culture of human induced pluripotent-derived hepatocytes in a perfused microfluidic system. The tuneable and bioorthogonal cross-linking enabled both retention of high cell viabilities and fabrication of a functional liver-on-chip solution. In paper II, we combined the developed HA-based hydrogel system with homo- and heterodimerizing helix-loop-helix peptides for modulation of both cross-linking density and biofunctionalization. We further demonstrated the possibilities to use these hydrogels as bioinks for 3D bioprinting where both the molecular composition and the physical properties of the printed structures could be dynamically altered, providing new avenues for four-dimensional (4D) bioprinting. In paper III we investigated the possibilities to chemically conjugate full size recombinant human laminin-521 (LN521) in the HA-based hydrogels system using copper-free click chemistry, with the aim to enable 3D culture and 3D bioprinting of neurons. We quantified the impact of using different linkers to tether LN521 and the influence of LN-functionalization on the structural and mechanical properties of the hydrogels. We show that both differentiated and non-differentiated neuroblastoma cells and long-term self-renewing neuroepithelial stem cells (lt-NES) remained viable in the hydrogels. The hydrogels also had a protected effect on lt-NES during syringe ejection and bioprinting. In paper IV, we used HA-based hydrogels modified with peptides sequences derived from fibronectin and laminin for culture of fetal primary astrocytes (FPA). We explored both the interactions between the hydrogels and FPA and possibilities to 3D bioprint FPAs.  Finally, in paper V, we developed HA-nanocellulose composite hydrogels with the aim to increase printing fidelity and enable fabrication of multi-layered bioprinted structures without the use of a support bath. In addition to HA, we used wood-fibre derived nanocellulose (NC) to increase the viscosity of the bioink during the printing process.  

The developed biorthogonal and modular hydrogel systems provide a large degree of flexibility that allows for encapsulation and culture of different cell types and processing using different techniques, which can contribute to further exploration of fabrication of biologically relevant tissue and disease models.   

Engineered human tissue and disease models can decrease the cost and time of developing new drugs and treatments, facilitate personalized medicine, and eliminate the need for animal models that poorly represent the human body and are ethically problematic. However, the current conventional cell expansion methods using 2D culture flasks cannot enable the development of such complex multi-cellular 3D models. In general, hydrogels are considered promising materials that can make the biofabrication of tissue models possible. Hydrogels are highly hydrated materials comprised of either synthetic or naturally derived polymers, or a combination of both, and can form an environment mimicking the biomacromolecular network surrounding cells in the body. This network of biopolymers, known as extracellular matrix (ECM), is comprised of proteins such as collagen, laminin, fibronectin, and polysaccharides such as hyaluronan (HA), heparan, keratan, and chondroitin sulfate. The design of hydrogels representing the physical and biochemical properties of the ECM and which can be used for biofabrication is challenging but of increasing interest due to the rapid progress in the development of 3D and 4D bioprinting techniques. As the ECM properties differ between various tissues and disease conditions and change over time, a dynamic modular hydrogel system is needed to that can be optimized for each cell and tissue type. This thesis aims to develop modular enzyme-responsive polysaccharide-based hydrogels for 3D cell culture and biofabrication. The natural polysaccharides, hyaluronic acid (HA) and alginate (Alg) were used as the main backbone in the hydrogels developed in this thesis. HA was modified by conjugating bicyclo[6.1.0]non-4-yne (BCN) to the backbone to form HA-BCN-based hydrogels by a bioorthogonal strain-promoted alkyne-azide cycloaddition. The click reaction between BCN and azide groups allowed for modulating the biochemical and mechanical properties of the HA-BCN hydrogels. HA-BCN was further decorated with peptides to explore peptide folding and dimerization-mediated dynamic cross-linking and biofunctionalization. This system was further used to explore possibilities to dynamically alter the properties of 3D bioprinted structures, mimicking the biomineralization process in bone tissue. In a different study, a tumor model comprising fibroblast and breast cancer cells (MCF7) was bioprinted using HA-BCN cross-linked by matrix metalloporotease (MMP) cleavable and PEG-diazide MMP-resistant cross-linkers, demonstrating the synergistic relationship between hydrogel degradability and cancer cell growth, intensified by the presence of fibroblasts. The possibility of incorporating a conductive module into this hydrogel system was explored using the enzyme-assisted polymerization of ETE-S to form an interpenetrating conductive network inside HA-BCN hydrogel. The in situ and user-triggered polymerization of conductive ETE-S was demonstrated after 3D printing HA-BCN bioink containing ETE-S monomers into a lattice shape structure. We also demonstrated that cellulose nanofibrils (CNF) improved the printability of HA-BCN bioinks, and this hybrid bioink was used for printing self-standing cell-laden 3D structures. Besides these studies, a novel enzymatically triggered thiol-based chemistry was developed to address the unwanted oxidation of thiol-containing hydrogels and decrease the off-target thiol reactions during hydrogel synthesis and formation. Alginate containing sulfhydryl moieties, protected by an enzyme-labile Phacm group (AlgCP), was treated with penicillin G acylase and subsequently formed a disulfide cross-linked hydrogel. We studied the gelation kinetics and rheological properties of AlgCP and different modes of cross-linking by reversible disulfide bonds, a thiol-maleimide Micheale-type addition reaction, and ionic interactions between alginate and Ca²⁺ ions. MCF7 breast cancer cells cultured in the AlgCP hydrogels formed spheroids that could be harvested by GSH dissolution of the hydrogels. Finally, this novel chemistry enabled bioprinting of multi-material 3D structures with control over the printed structure's physiochemical properties, including the type and density of cross-linkers. Bioprinted fibroblasts formed extended morphology, and MCF7 cells formed spheroids in the bioprinted lattice structures.   

The hydrogel systems developed and explored in this thesis are modular and exhibit dynamic and tunable properties, and are applicable for a wide range of 3D cell culture and bioprinting applications. The hydrogels were either formed in response to the activity of an enzyme or remodeled by enzymes. Both enzyme-responsive HA-BCN and AlgCP hydrogel systems are promising bioinks for generating more elaborate and spatially defined cell-laden 3D structures whose features can be altered post-printing by cell-secreted and extrinsic reagents. These hydrogel-based toolkits can play a vital role in developing tissue and disease models that can make the drug discovery process faster, cheaper, and animal-free.