Digitala Vetenskapliga Arkivet

Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
The life and death of perovskites: Interfacial function and degradation of lead halide perovskites studied by photoelectron spectroscopy
Uppsala universitet, Teknisk-naturvetenskapliga vetenskapsområdet, Fysiska sektionen, Institutionen för fysik och astronomi, Energimaterialens fysik.ORCID-id: 0000-0001-7351-8183
2021 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)Alternativ titel
Perovskiters liv och död : En studie av funktionen och degrationen i blyhalidperovskiters gränsskikt med fotoelektronspektroskopi (Svenska)
Abstract [en]

Lead halide perovskite solar cells are a promising new technology which could soon see widespread commercial application but is partly held back by poor long-term stability. In this thesis, photoelectron spectroscopy (PES) is used to study the dynamical processes at the surface or interfaces of lead halide perovskite materials. Some of these processes are responsible for the different types of degradation while others are essential for the function of the solar cell. The work includes a range of lead perovskite compositions with the general formula APbX3, in which A is a monovalent cation, and often organic (e.g. formamidinium or methylammonium), and X is a halide anion, typically Br- or I-. The compositions can also include mixtures of cations at the A and anions at the X site.

Part of this thesis is dedicated to investigating the degradation of the perovskite surface in response to both intense visible light and X-ray irradiation. The results show that intense illumination induces the decomposition of the perovskite into metallic lead, halide gas and organic halide salt, but also indicate how this process can be suppressed by the addition of small amounts of Cs+ ions and by adjusting the relative amounts of halides. A different process, induced by the X-ray radiolysis of the organic cation, is shown to consume rather than form metallic lead.

Another part of this thesis is dedicated to the investigation of the reactions at the interfaces between the perovskite and silver, copper or SnOx. The results show that both copper and silver react rapidly with the perovskite forming metal halides and that the metal can diffuse into the perovskite. Copper is particularly reactive, leading to the formation of two new compounds and the bulk degradation of the perovskite. The SnOx is significantly more stable but material intermixing results in the formation of a thin interface layer that may hinder charge extraction. 

Finally, a method for measuring both interfacial photovoltage and band alignment in a fully functional perovskite solar cell using hard X-ray photoelectron spectroscopy (HAXPES) is demonstrated. The results showcase the design considerations for the samples and the measurement setup and the potential of this technique. 

In summary, this thesis shows the suitability of PES for studying both the function and degradation of surfaces and interfaces of complex dynamical systems. It serves as a guide for future studies by highlighting challenges and possibilities faced when working with these systems.

Ort, förlag, år, upplaga, sidor
Uppsala: Acta Universitatis Upsaliensis, 2021. , s. 75
Serie
Digital Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology, ISSN 1651-6214 ; 2082
Nyckelord [en]
lead halide perovskite solar cells, interfacial degradation, heterojunction interfaces, photoelectron spectroscopy, operando
Nationell ämneskategori
Den kondenserade materiens fysik
Forskningsämne
Fysik med inriktning mot atom- molekyl- och kondenserande materiens fysik
Identifikatorer
URN: urn:nbn:se:uu:diva-454372ISBN: 978-91-513-1309-2 (tryckt)OAI: oai:DiVA.org:uu-454372DiVA, id: diva2:1601385
Disputation
2021-11-25, Häggsalen, Ångströmlaboratoriet, Lägerhyddsvägen 1, Uppsala, 09:15 (Engelska)
Opponent
Handledare
Tillgänglig från: 2021-11-02 Skapad: 2021-10-07 Senast uppdaterad: 2021-11-12
Delarbeten
1. Experimental and theoretical core level and valence band analysis of clean perovskite single crystal surface
Öppna denna publikation i ny flik eller fönster >>Experimental and theoretical core level and valence band analysis of clean perovskite single crystal surface
Visa övriga...
(Engelska)Ingår i: Advanced Materials, ISSN 0935-9648, E-ISSN 1521-4095Artikel i tidskrift (Övrigt vetenskapligt) Submitted
Nationell ämneskategori
Den kondenserade materiens fysik
Forskningsämne
Fysik med inriktning mot atom- molekyl- och kondenserande materiens fysik
Identifikatorer
urn:nbn:se:uu:diva-454337 (URN)
Tillgänglig från: 2021-09-28 Skapad: 2021-09-28 Senast uppdaterad: 2021-10-07
2. Partially Reversible Photoinduced Chemical Changes in a Mixed-Ion Perovskite Material for Solar Cells
Öppna denna publikation i ny flik eller fönster >>Partially Reversible Photoinduced Chemical Changes in a Mixed-Ion Perovskite Material for Solar Cells
Visa övriga...
2017 (Engelska)Ingår i: ACS Applied Materials and Interfaces, ISSN 1944-8244, E-ISSN 1944-8252, Vol. 9, nr 40, s. 34970-34978Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Metal halide perovskites have emerged as materials of high interest for solar energy-to-electricity conversion, and in particular, the use of mixed-ion structures has led to high power conversion efficiencies and improved stability. For this reason, it is important to develop means to obtain atomic level understanding of the photoinduced behavior of these materials including processes such as photoinduced phase separation and ion migration. In this paper, we implement a new methodology combining visible laser illumination of a mixed-ion perovskite ((FAP-bI(3))(0.85)(MAPbBr(3))(0.15)) with the element specificity and chemical sensitivity of core-level photoelectron spectroscopy. By carrying out measurements at a synchrotron beamline optimized for low X-ray fluxes, we are able to avoid sample changes due to X-ray illumination and are therefore able to monitor what sample changes are induced by visible illumination only. We find that laser illumination causes partially reversible chemistry in the surface region, including enrichment of bromide at the surface, which could be related to a phase separation into bromide- and iodide-rich phases. We also observe a partially reversible formation of metallic lead in the perovskite structure. These processes occur on the time scale of minutes during illumination. The presented methodology has a large potential for understanding light-induced chemistry in photoactive materials and could specifically be extended to systematically study the impact of morphology and composition on the photostability of metal halide perovskites.

Ort, förlag, år, upplaga, sidor
AMER CHEMICAL SOC, 2017
Nyckelord
photoelectron spectroscopy, laser illumination, lead halide perovskite, ion migration, phase separation, stability
Nationell ämneskategori
Den kondenserade materiens fysik
Identifikatorer
urn:nbn:se:uu:diva-340141 (URN)10.1021/acsami.7b10643 (DOI)000413131500043 ()28925263 (PubMedID)
Forskningsfinansiär
EU, FP7, Sjunde ramprogrammet, 321319Vetenskapsrådet, 2014-6019Vetenskapsrådet, 2014-6463StandUpStiftelsen för strategisk forskning (SSF), RMA15-0130
Tillgänglig från: 2018-01-26 Skapad: 2018-01-26 Senast uppdaterad: 2021-10-07Bibliografiskt granskad
3. Effect of halide ratio and Cs+ addition on the photochemical stability of lead halide perovskites
Öppna denna publikation i ny flik eller fönster >>Effect of halide ratio and Cs+ addition on the photochemical stability of lead halide perovskites
Visa övriga...
2018 (Engelska)Ingår i: Journal of Materials Chemistry A, ISSN 2050-7488, Vol. 6, nr 44, s. 22134-22144Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Lead halide perovskite solar cells with multi-cation/mixed halide materials now give power conversion efficiencies of more than 20%. The stability of these mixed materials has been significantly improved through the addition of Cs+ compared to the original methylammonium lead iodide. However, it remains one of the most significant challenges for commercialisation. In this study, we use photoelectron spectroscopy (PES) in combination with visible laser illumination to study the photo-stability of perovskite films with different compositions. These include Br : I ratios of 50 : 50 and 17 : 83 and compositions with and without Cs+. For the samples without Cs and the 50 : 50 samples, we found that the surface was enriched in Br and depleted in I during illumination and that some of the perovskite decomposed into Pb0, organic halide salts, and iodine. After illumination, both of these reactions were partially reversible. Furthermore, the surfaces of the films were enriched in organic halide salts indicating that the cations were not degraded into volatile products. With the addition of Cs+ to the samples, photo-induced changes were significantly suppressed for a 50 : 50 bromide to iodide ratio and completely suppressed for perovskites with a 17 : 83 ratio at light intensities exceeding 1 sun equivalent.

Nationell ämneskategori
Den kondenserade materiens fysik
Identifikatorer
urn:nbn:se:uu:diva-368425 (URN)10.1039/C8TA05795H (DOI)000456724800044 ()
Forskningsfinansiär
Vetenskapsrådet, 2014-6019ÅForsk (Ångpanneföreningens Forskningsstiftelse)Stiftelsen för strategisk forskning (SSF), RMA15-0130Energimyndigheten, P43294-1StandUp
Tillgänglig från: 2018-12-04 Skapad: 2018-12-04 Senast uppdaterad: 2021-10-07Bibliografiskt granskad
4. X-ray stability and degradation mechanism of lead halide perovskites and lead halides.
Öppna denna publikation i ny flik eller fönster >>X-ray stability and degradation mechanism of lead halide perovskites and lead halides.
Visa övriga...
2021 (Engelska)Ingår i: Physical Chemistry, Chemical Physics - PCCP, ISSN 1463-9076, E-ISSN 1463-9084, Vol. 23, nr 21, s. 12479-12489Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Lead halide perovskites have become a leading material in the field of emerging photovoltaics and optoelectronics. Significant progress has been achieved in improving the intrinsic properties and environmental stability of these materials. However, the stability of lead halide perovskites to ionising radiation has not been widely investigated. In this study, we investigated the radiolysis of lead halide perovskites with organic and inorganic cations under X-ray irradiation using synchrotron based hard X-ray photoelectron spectroscopy. We found that fully inorganic perovskites are significantly more stable than those containing organic cations. In general, the degradation occurs through two different, but not mutually exclusive, pathways/mechanisms. One pathway is induced by radiolysis of the lead halide cage into halide salts, halogen gas and metallic lead and appears to be catalysed by defects in the perovskite. The other pathway is induced by the radiolysis of the organic cation which leads to formation of organic degradation products and the collapse of the perovskite structure. In the case of Cs0.17FA0.83PbI3, these reactions result in products with a lead to halide ratio of 1 : 2 and no formation of metallic lead. The radiolysis of the organic cation was shown to be a first order reaction with regards to the FA+ concentration and proportional to the X-ray flux density with a radiolysis rate constant of 1.6 × 10-18 cm2 per photon at 3 keV or 3.3 cm2 mJ-1. These results provide valuable insight for the use of lead halide perovskite based devices in high radiation environments, such as in space environments and X-ray detectors, as well as for investigations of lead halide perovskites using X-ray based techniques.

Ort, förlag, år, upplaga, sidor
Royal Society of Chemistry, 2021
Nationell ämneskategori
Fysikalisk kemi
Identifikatorer
urn:nbn:se:uu:diva-454329 (URN)10.1039/d1cp01443a (DOI)000653852800001 ()34037011 (PubMedID)
Forskningsfinansiär
Stiftelsen för strategisk forskning (SSF), RMA15-0130Vetenskapsrådet, VR 2018-04125Vetenskapsrådet, VR 2018-04330Vetenskapsrådet, VR 201806465EnergimyndighetenGöran Gustafssons Stiftelse för främjande av vetenskaplig forskning vid Uppsala universitet och Kungl tekniska högskolan (UU/KTH)Carl Tryggers stiftelse för vetenskaplig forskning , CTS 18:59
Tillgänglig från: 2021-09-28 Skapad: 2021-09-28 Senast uppdaterad: 2024-01-15Bibliografiskt granskad
5. Degradation Mechanism of Silver Metal Deposited on Lead Halide Perovskites
Öppna denna publikation i ny flik eller fönster >>Degradation Mechanism of Silver Metal Deposited on Lead Halide Perovskites
Visa övriga...
2020 (Engelska)Ingår i: ACS Applied Materials and Interfaces, ISSN 1944-8244, E-ISSN 1944-8252, Vol. 12, nr 6, s. 7212-7221Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Lead halide perovskite solar cells have significantly increased in both efficiency and stability over the last decade. An important aspect of their longterm stability is the reaction between the perovskite and other materials in the solar cell. This includes the contact materials and their degradation if they can potentially come into contact through, e.g., pinholes or material diffusion and migration. Here, we explore the interactions of silver contacts with lead halide perovskites of different compositions by using a model system where thermally evaporated silver was deposited directly on the surface of the perovskites. Using X-ray photoelectron spectroscopy with support from scanning electron microscopy, X-ray diffraction, and UV-visible absorption spectroscopy, we studied the film formation and degradation of silver on perovskites with different compositions. The deposited silver does not form a continuous silver film but instead tends to form particles on a bare perovskite surface. These particles are initially metallic in character but degrade into AgI and AgBr over time. The degradation and migration appear unaffected by the replacement of methylammonium with cesium but are significantly slowed down by the complete replacement of iodide with bromide. The direct contact between silver and the perovskite also significantly accelerates the degradation of the perovskite, with a significant loss of organic cations and the possible formation of PbO, and, at the same time, changed the surface morphology of the iodide-rich perovskite interface. Our results further indicate that an important degradation pathway occurred through gas-phase perovskite degradation products. This highlights the importance of control over the interface materials and the use of completely hermetical barrier layers for the long-term stability and therefore the commercial viability of silver electrodes.

Ort, förlag, år, upplaga, sidor
AMER CHEMICAL SOC, 2020
Nyckelord
perovskite solar cells, electrode stability, X-ray photoelectron spectroscopy, interface chemistry, noble metal electrodes
Nationell ämneskategori
Materialkemi
Identifikatorer
urn:nbn:se:uu:diva-407282 (URN)10.1021/acsami.9b20315 (DOI)000514256400040 ()31958007 (PubMedID)
Forskningsfinansiär
Vetenskapsrådet, VR 2018-04125Vetenskapsrådet, 2018-06465Vetenskapsrådet, 2018-04330Stiftelsen för strategisk forskning (SSF), RMA15-0130Energimyndigheten, P43549-1StandUpÅForsk (Ångpanneföreningens Forskningsstiftelse)Göran Gustafssons stiftelse för naturvetenskaplig och medicinsk forskning (KVA)
Tillgänglig från: 2020-03-23 Skapad: 2020-03-23 Senast uppdaterad: 2021-10-07Bibliografiskt granskad
6. The complex degradation mechanism of copper electrodes on lead halide perovskite
Öppna denna publikation i ny flik eller fönster >>The complex degradation mechanism of copper electrodes on lead halide perovskite
Visa övriga...
(Engelska)Ingår i: ACS Materials Science Au, E-ISSN 2694-2461Artikel i tidskrift (Övrigt vetenskapligt) Submitted
Nyckelord
perovskite solar cell, X-ray photoelectron spectroscopy, stability, back contact, metal, interface chemistr
Nationell ämneskategori
Fysikalisk kemi
Identifikatorer
urn:nbn:se:uu:diva-454366 (URN)
Tillgänglig från: 2021-09-28 Skapad: 2021-09-28 Senast uppdaterad: 2023-10-06
7. SnOx Atomic Layer Deposition on Bare Perovskite: An Investigation of Initial Growth Dynamics, Interface Chemistry, and Solar Cell Performance
Öppna denna publikation i ny flik eller fönster >>SnOx Atomic Layer Deposition on Bare Perovskite: An Investigation of Initial Growth Dynamics, Interface Chemistry, and Solar Cell Performance
Visa övriga...
2021 (Engelska)Ingår i: ACS Applied Energy Materials, E-ISSN 2574-0962, Vol. 4, nr 1, s. 510-522Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

High-end organic–inorganic lead halide perovskite semitransparent p–i–n solar cells for tandem applications use a phenyl-C61-butyric acid methyl ester (PCBM)/atomic layer deposition (ALD)-SnOx electron transport layer stack. Omitting the PCBM would be preferred for manufacturing, but has in previous studies on (FA,MA)Pb(Br,I)3 and (Cs,FA)Pb(Br,I)3 and in this study on Cs0.05FA0.79MA0.16PbBr0.51I2.49 (perovskite) led to poor solar cell performance because of a bias-dependent light-generated current. A direct ALD-SnOx exposure was therefore suggested to form a nonideal perovskite/SnOx interface that acts as a transport barrier for the light-generated current. To further investigate the interface formation during the initial ALD SnOx growth on the perovskite, the mass dynamics of monitor crystals coated by partial p–i–n solar cell stacks were recorded in situ prior to and during the ALD using a quartz crystal microbalance. Two major finds were made. A mass loss was observed prior to ALD for growth temperatures above 60 °C, suggesting the decomposition of the perovskite. In addition, a mostly irreversible mass gain was observed during the first exposure to the Sn precursor tetrakis(dimethylamino)tin(IV) that is independent of growth temperature and that disrupts the mass gain of the following 20–50 ALD cycles. The chemical environments of the buried interface were analyzed by soft and hard X-ray photoelectron spectroscopy for a sample with 50 ALD cycles of SnOx on the perovskite. Although measurements on the perovskite bulk below and the SnOx film above did not show chemical changes, additional chemical states for Pb, Br, and N as well as a decrease in the amount of I were observed in the interfacial region. From the analysis, these states and not the heating of the perovskite were concluded to be the cause of the barrier. This strongly suggests that the detrimental effects can be avoided by controlling the interfacial design.

Ort, förlag, år, upplaga, sidor
American Chemical Society (ACS), 2021
Nyckelord
perovskite solar cell, ALD, in situ QCM, HAXPES, interface, SnOx
Nationell ämneskategori
Materialkemi
Identifikatorer
urn:nbn:se:uu:diva-438732 (URN)10.1021/acsaem.0c02405 (DOI)000613720100058 ()33615157 (PubMedID)
Forskningsfinansiär
StandUpVetenskapsrådet, VR 2018-04125Vetenskapsrådet, 2018-06465Vetenskapsrådet, 2018-04330Stiftelsen för strategisk forskning (SSF), RMA15-0130Energimyndigheten, P43549-1Energimyndigheten, 2017-004796EU, Horisont 2020, 730872
Tillgänglig från: 2021-03-30 Skapad: 2021-03-30 Senast uppdaterad: 2024-01-15Bibliografiskt granskad
8. Direct measurements of interfacial photovoltage and band alignment in perovskite solar cells using hard X-ray photoelectron spectroscopy
Öppna denna publikation i ny flik eller fönster >>Direct measurements of interfacial photovoltage and band alignment in perovskite solar cells using hard X-ray photoelectron spectroscopy
Visa övriga...
2023 (Engelska)Ingår i: ACS Applied Materials and Interfaces, ISSN 1944-8244, E-ISSN 1944-8252, Vol. 15, nr 9, s. 12485-12494Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

A heterojunction is the key junction for charge extraction in many thin film solar cell technologies. However, the structure and band alignment of the heterojunction in the operating device are often difficult to predict from calculations and, due to the complexity and narrow thickness of the interface, are difficult to measure directly. In this study, we demonstrate a technique for direct measurement of the band alignment and interfacial electric field variations of a fully functional lead halide perovskite solar cell structure under operating conditions using hard X-ray photoelectron spectroscopy (HAXPES). We describe the design considerations required in both the solar cell devices and the measurement setup and show results for the perovskite, hole transport, and gold layers at the back contact of the solar cell. For the investigated design, the HAXPES measurements suggest that 70% of the photovoltage was generated at this back contact, distributed rather equally between the hole transport material/gold interface and the perovskite/hole transport material interface. In addition, we were also able to reconstruct the band alignment at the back contact at equilibrium in the dark and at open circuit under illumination.

Ort, förlag, år, upplaga, sidor
American Chemical Society (ACS), 2023
Nationell ämneskategori
Den kondenserade materiens fysik
Forskningsämne
Fysik med inriktning mot atom- molekyl- och kondenserande materiens fysik
Identifikatorer
urn:nbn:se:uu:diva-454370 (URN)10.1021/acsami.2c17527 (DOI)000949872700001 ()36847773 (PubMedID)
Forskningsfinansiär
Vetenskapsrådet, VR 2016-04590Vetenskapsrådet, VR 2018-04125Vetenskapsrådet, VR 2018-04330Vetenskapsrådet, VR 2018-06465Energimyndigheten, P50626-1Energimyndigheten, P43549-1Göran Gustafssons Stiftelse för främjande av vetenskaplig forskning vid Uppsala universitet och Kungl tekniska högskolan (UU/KTH)Stiftelsen för strategisk forskning (SSF), RMA15-0130Carl Tryggers stiftelse för vetenskaplig forskning , CTS 18:59
Tillgänglig från: 2021-09-28 Skapad: 2021-09-28 Senast uppdaterad: 2023-04-17Bibliografiskt granskad

Open Access i DiVA

UUThesis_S-Svanström-2021(4086 kB)544 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 4086 kBChecksumma SHA-512
49fc4e18ce9e1fb5a355312f110fda1a701e83258b137f6da3b759ade8224b9f880697048f81d178677a4ff54a45605ee903605042af842516f0275e8056c82c
Typ fulltextMimetyp application/pdf

Sök vidare i DiVA

Av författaren/redaktören
Svanström, Sebastian
Av organisationen
Energimaterialens fysik
Den kondenserade materiens fysik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 547 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 1417 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf