This report describes a degree project at the Royal Institute of Technology. The purpose was to create a unique system solution in which a CAN adapter card (Controller Area Network) was to be integrated with an air pressure monitoring system for heavy duty vehicles. The goal was to present measurement values ​​from valve sensors on a personal computer. The air pressure monitoring system is called J1939 - TPMS and is a finished product. J1939 - TPMS sends CAN-frames to a CAN-bus in J1939 format. These frames are to be read by the adapter card and presented on a terminal program on a personal computer. The job has been to investigate how the J1939 - TPMS system works in detail. The role of the J1939 protocol and its relationship with CAN has been clarified. Also, a detailed description of how J1939 frames are interpreted and how the measuring data TPMS is decoded is done. Principles for how a CAN node works has been clarified. Based on this, a CAN adapter card has been designed. The design has included component selection, design of electronics schema, design of computer cards and development of embedded software. The result was a ready-to-use CAN adapter card tested with J1939-TPMS. Requirements for the project were met. However, more work with the card will be needed to make it a finished product. The work was carried out at Motion Control in Västerås AB in cooperation with Transeco Däckservice (Transeco Tire Service).