Change search
ReferencesLink to record
Permanent link

Direct link
Modeling and on-line optimization of cone crushers
Luleå University of Technology, Department of Computer Science, Electrical and Space Engineering, Signals and Systems.
2013 (English)Licentiate thesis, comprehensive summary (Other academic)
Abstract [en]

This licentiate thesis deals with the Modeling, Control, and On-line optimization of Cone Crushers. Cone crushers are used for size reduction of minerals and are considered as a central element in many mineral processing plants. It consists of a cone rotating eccentrically inside a larger bowl and the particles are crushed in the cavity between these. In spite of its simple construction, the cone crusher represents a complex system from a modeling point of view, as its operation comprises many physical actions that are combined together to give the overall behavior.The main purpose of the work is to have a dynamic model that can predict the ow and the size distribution of the crusher as a function of the main manipulated variables so that realistic simulation of closed loop control strategies can be achieved. The model is based on rst principles and includes many factors that are known to aect the operation of the crusher, e.g operation of the crusher with two dierent materials. For the control of the crusher, a number of dierent approaches were considered. First, a simple PI controller of the percentage of large material in the output produced was simulated. It is known and also predicted by the model that the cone crusher's total throughput depends on the Eccentric Speed, and exhibits a quasi-concave response with respect to this variable.On-line optimization of the throughput is suggested to be based on the concept of Extremum Seeking Control (ESC).Two dierent methods of ESC were applied. The classic Band Pass Filters based approach, and the Extended Kalman Filter Based approach. Both methods were modied in order to achieve improved performance. These modications can be applied on other plants as well. Simulations of the closed loop for the two methods have demonstrated the applicability of ESC for optimizing the crusher on-line. The optimum operating point was reached in all cases, leading to improvement of the performance of the crusher.

Place, publisher, year, edition, pages
Luleå: Luleå tekniska universitet, 2013.
Licentiate thesis / Luleå University of Technology, ISSN 1402-1757
Research subject
Control Engineering
URN: urn:nbn:se:ltu:diva-26250Local ID: d560cdd8-796c-4ab7-ae90-b65c2d2a603eISBN: 978-91-7439-674-4ISBN: 978-91-7439-675-1 (PDF)OAI: diva2:999411
Godkänd; 2013; 20130520 (khaatt); Tillkännagivande licentiatseminarium 2013-05-23 Nedanstående person kommer att hålla licentiatseminarium för avläggande av teknologie licentiatexamen. Namn: Khalid T. Atta Ämne: Reglerteknik/Automatic Control Uppsats: Modeling and On-line Optimization of Cone Crushers Examinator: Docent Andreas Johansson, Institutionen för system- och rymdteknik, Luleå tekniska universitet Diskutant: Professor Matti Vilkko, Tampere University of Technology, Finland Tid: Tisdag den 18 juni 2013 kl 13.30 Plats: A109, Luleå tekniska universitetAvailable from: 2016-09-30 Created: 2016-09-30Bibliographically approved

Open Access in DiVA

fulltext(2595 kB)0 downloads
File information
File name FULLTEXT01.pdfFile size 2595 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Atta, Khalid
By organisation
Signals and Systems

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 1 hits
ReferencesLink to record
Permanent link

Direct link