Change search
ReferencesLink to record
Permanent link

Direct link
Aspects of precipitation in alloy Inconel 718
Luleå tekniska universitet.
2004 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

A study was made of the microstructure of the Ni-base alloy Inconel 718 with emphasis on the precipitation and stability of intermetallic phases as affected by heat treatments. In addition the effect of the precipitation on selected mechanical properties namely hardness, creep notch sensitivity and hot ductlity were investigated. The materials studied were a spray-formed version and three wrought versions of the alloy. The spray-formed version of the alloy was of interest since it exhibited a superior compositional homogeneity to more conventional forms of the alloy. To characterise the precipitation kinetics and to determine the associated hardening, a series of isothermal ageing treatments were carried out on both spray-formed and ring rolled material at selected temperatures between 600°C and 1025°C for up to 100h. The results were presented in the form of TTH diagrams for the two alloys. The heat treated specimens were then studied using optical microscopy, scanning electron microscopy and transmission electron microscopy. Where possible these were supplemented with quantitative metallographic measurements of volume fraction and precipitates size.The three main intermetallic precipitation phases in IN 718 are (i) gamma’ having a composition Ni3(Al,Ti), a cubic crystal structure and cubic or spherical particle shape (ii) gamma” having a composition Ni3Nb, a bct crystal structure and a lens-like disc shape (iii)delta having composition Ni3Nb, an orthorhombic crystal structure and forming as grain boundary particles and films as well as thin plates extending long distances into the grains. In thermomechanically processed material the delta-phase can also occur as shorter platelets and particles resulting from fragmentation of the original plates. In this work the rates of precipitation and the temperature ranges of their existence were determined qualitatively. Moreover the coarsening of the ganmma" precipitates was determined quantitatively. The kinetics of precipitation and dimensional coarsening of the delta-phase were also established quantitatively. Similarly, the dissolution kinetics of the delta-phase were measured in the spray-formed and three wrought versions of the alloy leading to a determination of the effect of Nb-content on the delta solvus temperature. After a standard heat treatment, the spray-formed IN 718 was found to be creep notch sensitive according to an SAE-AMS standard rupture test. It was found that notch ductility could be restored to the alloy by inserting a delta-phase precipitation treatment at 875°C-900°C prior to the standard heat treatment. This could be attributed to the formation of a more favourable delta-phase morphology than that formed during the solution treatment at 954°C in the standard heat treatment cycle. A study was made of high temperature tensile properties of a wrought version of IN 718 in particular in relation to the problem of hot cracking in repair welding. Measurements were made of the strength loss temperature on heating and the strength and ductility return temperatures on cooling. These properties provide an indication of the sensitivity of the alloy to hot cracking due to liquation. The tests were made on the alloy after various heat treatments designed to produce microstructures with two different grain sizes with and without delta-phase precipitation. Hot tensile tests were also performed on the in-situ solidified alloy in order to describe the weld metal ductility and properties. The grain size and the presence of large fractions of delta-phase precipitated at 900°C had only small effects on the strength loss temperature and brittle-ductile transition of the alloy. On the other hand, a small fraction of delta-phase precipitated in the grain boundaries at 960°C reduced the brittle-ductile transition temperature significantly. It is proposed that the reduction was associated with interaction between the grain boundary delta-phase and grain boundary boron segregation that was observed in all the heat treated materials.

Place, publisher, year, edition, pages
Luleå: Luleå tekniska universitet, 2004. , 122 p.
Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, ISSN 1402-1544 ; 2004:20
Research subject
Engineering Materials
URN: urn:nbn:se:ltu:diva-25931Local ID: bc0b2a70-6f65-11db-962b-000ea68e967bOAI: diva2:999089
Godkänd; 2004; 20061026 (haneit)Available from: 2016-09-30 Created: 2016-09-30Bibliographically approved

Open Access in DiVA

fulltext(56884 kB)0 downloads
File information
File name FULLTEXT01.pdfFile size 56884 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

ReferencesLink to record
Permanent link

Direct link