Change search
ReferencesLink to record
Permanent link

Direct link
The effect of fine scale turbulence on the corner vortices of a rectangular prism
Luleå University of Technology, Department of Business Administration, Technology and Social Sciences, Innovation and Design.
2002 (English)Report (Other academic)
Abstract [en]

Strong winds produced in storms and hurricanes have a destructive effect on buildings, particulary on low-rise structures such as industrial complexes. The damage often starts when the roof is teared off because of strong suction pressures which are produced near corners and edges by the turbulent winds of the atmospheric boundary layer. When the wind approaches the corner, two vortices which generate extreme negative pressures, are formed. A number of work has been conducted on the effect of turbulence on the corner pressure field of low-rise buildings. However, there is still a need to investigate the effect of the finest turbulence scales. An experimental programme, which is the final part of a Master of Science in Mechanical Engineering, was conducted to investigate the effect of fine scale turbulence on the corner vortices of a rectangular prism, which is a common representation of a low-rise structure. Experiments were conducted in a wind tunnel using grid and rod configurations to produce turbulent flows. The results from the grid generated turbulence show that both increasing turbulence intensity and length scale increase the pressure coefficients, although the mean pressure is reasonably constant for varying turbulence length scale. Considering the finest turbulence scales, which were induced by the rod, the largest effect was found when the rod was positioned in the lateral direction slightly under the leading edge. Then, the fluctuating pressure coefficient increased and the pressure field under the corner vortices started to fluctuate at a frequency of 240 Hz, which is an interesting phenomenon.

Place, publisher, year, edition, pages
Luleå, 2002. , 64 p.
Master's thesis, ISSN 1402-1617 ; 2002:063
Research subject
Functional Product Development
URN: urn:nbn:se:ltu:diva-25466Local ID: f5751320-dd7b-11de-bae5-000ea68e967bOAI: diva2:998518
Godkänd; 2002; 20091130 (marsan)Available from: 2016-09-29 Created: 2016-09-29Bibliographically approved

Open Access in DiVA

fulltext(3481 kB)0 downloads
File information
File name FULLTEXT01.pdfFile size 3481 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Sandberg, Marcus
By organisation
Innovation and Design

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

ReferencesLink to record
Permanent link

Direct link