Change search
ReferencesLink to record
Permanent link

Direct link
Interaction between shotcrete and rock: experimental and numerical study
2005 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

At LKAB’s underground mines in Malmberget and Kiruna in northern Sweden shotcrete and rock bolts are the main rock support elements. A safe working environment for the miners and high accessibility to the mine are important issues. To address these issues and to improve the use of the support, LKAB initiated a doctoral thesis study on the interaction between its rock support system and the rock. The objectives of this thesis were: to identify important parameters involved in the interaction between shotcrete and rock and if necessary investigate important quantities of these parameters, to improve the understanding of the interaction of shotcrete and rock. To achieve the first objective a number of laboratory and field tests were carried out. The second objective was achived by numerical analyses. The main conclusions are: The analyses showed that the rock strength and the unevenness of the surface had a large impact on the number of failures at the interface and in the lining. Furthermore, the behaviour of the lining was sensitive to small amplitudes of the surface roughness. A high bond strength was favourable according to the analyses. The results from the field tests showed the importance of the bond at the interface. If bond failure occurs the ability to distribute and control the crack width ceases. Failure mapping in the mine showed that that a thin shotcrete layer (<20 mm) did not perform well. It is therefore, important that the designed thickness is achieved when shotcreting. The extent of the excavated damage zone had a minor effect on the behaviour of the shotcrete lining if the surface was uneven. For an even surface, the influence of the extent of the EDZ on shotcrete was obvious but not serious. The rock support is generally designed for static loading conditions. In many cases, however, the openings are also subjected to dynamic loads. By field tests, vibration measurements and analyses the influence from blasting induced stress waves on the performance of shotcrete was investigated. The main conclusions are: Failure mapping showed that the fibre reinforced shotcrete has the ability to give stable conditions close to the drawpoint. The non-linear analyses showed fair agreement with the failure mapping. The single-degree-of-freedom (SDOF) model, though it is relatively simple, can be used to predict the response of an arbitrarily shaped rock wedge supported by shotcrete.

Place, publisher, year, edition, pages
Luleå: Luleå tekniska universitet, 2005. , 24 p.
Series
Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, ISSN 1402-1544 ; 2005:48
Research subject
Mining and Rock Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-18759Local ID: a2d4e790-515a-11db-9592-000ea68e967bOAI: oai:DiVA.org:ltu-18759DiVA: diva2:991770
Note
Godkänd; 2005; 20061001 (ysko)Available from: 2016-09-29 Created: 2016-09-29Bibliographically approved

Open Access in DiVA

fulltext(5476 kB)4 downloads
File information
File name FULLTEXT01.pdfFile size 5476 kBChecksum SHA-512
ea5aab5e8b413240e8e469c2f7c595e464b4459d6aef73fc64caac1505cc25df2d0bbc3d653dd7388123a510cc4eca1e39ebcf5e6be6c03ab3c193e13ed6b264
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Malmgren, Lars

Search outside of DiVA

GoogleGoogle Scholar
Total: 4 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 22 hits
ReferencesLink to record
Permanent link

Direct link