Change search
ReferencesLink to record
Permanent link

Direct link
Fracture mechanics analysis of concrete structures
Luleå University of Technology, Department of Civil, Environmental and Natural Resources Engineering, Structural and Construction Engineering.
1995 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

This thesis presents results from numerical and analytical analyses of concrete structures as well as results from laboratory tests. Numerical methods based on the finite element method and fracture mechanics are used. The thesis comprises five papers and a general introductory part. The five papers deal with the following topics: Material properties for concrete at low temperatures, Paper A: This paper presents results from an investigation of the fatigue strength and the fracture energy of water saturated unreinforced concrete. The tests were carried out both at room temperature and under cold conditions. The experiments show that the load bearing capacity of water saturated specimens is strongly affected of low temperatures. The water in the pores freezes and generates a load bearing ice skeleton. The compressive and splitting strength of the concrete will as a result increase. Also the fracture energy increases at low temperatures. Both the absolute and the relative fatigue strength increase for water saturated concrete. Bond properties of concrete, Paper B: The paper discusses the influence of splitting failure on the bond properties of deformed reinforcement bars. Laboratory tests with normal and high strength concrete are presented. The tests were designed to obtain a high degree of confinement with the intention to establish the upper limit of the bond strength. The bond strength has been normalized with regard to the concrete splitting strength. The high strength concrete has a higher normalized bond strength than the normal strength concrete for bar diameters of 8 and 16 mm. A theoretical model, based on fracture mechanics, is presented. The model gives relationships between the pressure generated by the mechanical interaction and the length of the splitting cracks. Modelling of concrete shaft in a gravity based offshore structure. Influence of hydraulic pressure on fracture mechanics parameters, Paper C: The paper describes an analysis carried out in order to predict the risk of concrete delamination in the shaft of the Draugen Gravity Based Structure (GBS) platform situated in the northern Atlantic. The analysis formed part of an independent verification of the platform by VERITEC in Norway and was performed using a nonlinear finite element program (DIANA) with a material model based on fracture mechanics. The analysis shows that there was no risk of progressive cracking or delamination in the shaft of the studied gravity based offshore structure. Modelling of mixed mode fracture, Paper E: This paper describes numerical modelling of fracture formation under combined tensile and shear loading. The numerical model used is based on the Inner Softening Band Approach, see Klisinski et al. (1991). The results are compared with test results presented in Hassanzadeh (1992) and Nooru-Mohamed (1992). The model reproduces crack pattern and nominal stress displacement curves. The compressive stresses due to dilation can also be modelled. The stress rotations are generally small. In the final stage of the test, the stress rotation increases in some elements, especially in the smallest elements, so that more cracks should be introduced in each element in order to avoid interlocking effects. Anchor bolts in concrete, Papers D and E: The first paper [D] presents results from anchor bolt tests, comprising both plane and axisymmetric specimens. Different design formulas are discussed. Results from finite element analyses are presented. The second paper [E] presents analyses and tests on a plane anchor bolt specimen. The analyses are based on the Inner Softening Band Approach, see Klisinski et al. (1991). The analysis reproduces deformations at maximum load and crack pattern at an early stage of the test. Peak loads are overestimated. The post peak behaviour is not properly captured due to stress interlocking even before the peak load is reached. The possibility to introduce more then one crack in an element seems to be an essential step for further development of the analysis.

Place, publisher, year, edition, pages
Luleå: Luleå tekniska universitet, 1995. , 15 p.
Series
Doctoral thesis / Luleå University of Technologyy… → 31 dec 1996, ISSN 0348-8373 ; 179
Research subject
Structural Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-18207Local ID: 769b7700-f42c-11db-ac9f-000ea68e967bOAI: oai:DiVA.org:ltu-18207DiVA: diva2:991214
Note
Godkänd; 1995; 20070426 (ysko)Available from: 2016-09-29 Created: 2016-09-29Bibliographically approved

Open Access in DiVA

fulltext(15012 kB)3 downloads
File information
File name FULLTEXT01.pdfFile size 15012 kBChecksum SHA-512
bb7c969a8077e46f0c37f6c110950df10b529717e4aca9b4d3af07d222b714d4c276ae76d59aac6650f944e8a243d42297f91ab7a2af91c4a40ab332944a5422
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Ohlsson, Ulf
By organisation
Structural and Construction Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 3 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 14 hits
ReferencesLink to record
Permanent link

Direct link