Change search
ReferencesLink to record
Permanent link

Direct link
Track circuits’ robustness: Modeling, measurement and simulation
Luleå University of Technology, Department of Civil, Environmental and Natural Resources Engineering, Operation, Maintenance and Acoustics.
2014 (English)Licentiate thesis, comprehensive summary (Other academic)
Abstract [en]

In countries with rough weather conditions, frequent delays cause railway companies to waste time and money. Many of these delays are related to the train detection systems, as the old DC track circuits are still used in some countries, including Sweden, our case study. Since the most important factor in the railway system is safety, in some cases, the train detection system gets incorrect information and detects a non-existent train. The train slows down to avoid a problem in the track (with other trains or other faults), causing prolonged delays with cascading effects. The analysis in this licentiate contributes to the detection and reduction of TC failures; this, in turn, will save money for the railway community.A classification of the most probable causes of failures related to the train detection system was derived from the Swedish failures report database 0FELIA. After classifying failures, we focussed on the three most common worst case scenarios: low resistance between the rails, external interference such as a lightning strike, and iron-powder-bridges in the insulated joint.Electromagnetic interferences (EMI) are a problem for the railway system in general. One source of electromagnetic (EM) transients is the return current harmonic produced by the engine of the rolling stock itself. In the first stage of this licentiate, we implemented a Matlab model of the power supply system of the Swedish railway infrastructure, using the characteristics and previous measures of a real source. A model of a train as an active load validated by the manufacturer was integrated as a subsystem in different positions of the infrastructure. This method was used to study the behaviour of the low frequency system from an electrical point of view but it could also be used as input for an electromagnetic model using high frequencies. The model was validated through measurements taken in northern Sweden.In addition, a 3D model of the whole railway system was proposed. The simulation software was CST STUDIO SUITE® (Computer Simulation Technology Studio Suite), supported by real measurements on site and the lab to tune and validate the model. The results of the simulation show that the model fits with reality and is reliable for the study of track circuit sections.Some measurements followed the current standards, but we also analysed points not covered by them, allowing us to update the current standards

Place, publisher, year, edition, pages
2014. , 244 p.
Series
Licentiate thesis / Luleå University of Technology, ISSN 1402-1757
Keyword [en]
Track circuit, Relay, False positive signals, Signalling in railway, Modelling, Simulation, Testing, Robustness, Interoperability, Reliability, Railway Infrastructure, Technology - Electrical engineering, electronics and photonics, Information technology - Telecommunication, Information technology - Computer engineering, Technology - Engineering physics, Information technology - Systems engineering
Keyword [sv]
Teknikvetenskap - Elektroteknik, elektronik och fotonik, Informationsteknik - Telekommunikation, Informationsteknik - Datorteknik, Teknikvetenskap - Teknisk fysik, Informationsteknik - Systemteknik
Research subject
Operation and Maintenance
Identifiers
URN: urn:nbn:se:ltu:diva-18002Local ID: 6564eb9f-06b3-4807-aa55-d20196d84b65ISBN: 978-91-7583-045-2ISBN: 978-91-7583-046-9 (PDF)OAI: oai:DiVA.org:ltu-18002DiVA: diva2:991008
Note
Godkänd; 2014; 20140924 (emirod); Nedanstående person kommer att hålla licentiatseminarium för avläggande av teknologie licentiatexamen. Namn: Emilio Rodríguez Martínez Ämne: Drift och underhållsteknik/Operation and Maintenance Uppsats: Track Circuits’ Robustness – Modeling, Measurement and Simulation Examinator: Professor Diego Galar Pascual, Institutionen för samhällsbyggnad och naturresurser, Luleå tekniska universitet Diskutant: Professor Ajit Kumar Verma, Haugesund University College Tid: Torsdag 20 november 2014, kl 10:00 Plats: F236, Luleå tekniska universitetAvailable from: 2016-09-29 Created: 2016-09-29Bibliographically approved

Open Access in DiVA

fulltext(10928 kB)10 downloads
File information
File name FULLTEXT01.pdfFile size 10928 kBChecksum SHA-512
df4c9b478bb5a80a8fb3d9c69a8513dac929ea104156edb3b47bfe0fc429106c855423e52a9404425c496de7fa2ccf435e9707a025187c4d0ce8fe0c32558e84
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Rodriguez, Emilio
By organisation
Operation, Maintenance and Acoustics

Search outside of DiVA

GoogleGoogle Scholar
Total: 10 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 283 hits
ReferencesLink to record
Permanent link

Direct link