Change search
ReferencesLink to record
Permanent link

Direct link
Multi-functional composite materials: CFRP thin film capacitors
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Material Science.
2011 (English)Licentiate thesis, comprehensive summary (Other academic)
Abstract [en]

The use of lightweight materials in structural applications is ever increasing. Today, lightweight engineering materials are needed to realise greener, safer and more competitive products. A route to achieve this could be to combine more than one primary function in a material or component to create multi-functionality, thus reducing the number of components and ultimately the overall weight. This thesis presents an approach towards realising novel multi-functional polymer composites. A series of structural capacitor materials made from carbon fibre reinforced polymers have been developed, manufactured and tested. In papers I and II, capacitors have been manufactured using different papers and polymer films as dielectric separator employing carbon fibre/epoxy pre-pregs as structural electrodes. Plasma treatment was used as a route for improved epoxy/polymer film adhesion. The manufactured materials were evaluated for mechanical performance by ILSS and tearing tests and electrical performance by measuring capacitance and dielectric breakdown voltage. In paper III the concept was extended in a parametric study using the most promising approach with a polymer film as dielectric separator. Three thicknesses of PET (50, 75 and 125 µm) were used as dielectric separator with carbon fibre/epoxy pre-pregs as structural electrodes. PET was chosen due to availability in different thicknesses as well as the frequent use in ordinary capacitors making it a suitable candidate. As in paper I and II, plasma treatment was used to improve the PET/epoxy adhesion. The capacitor materials were evaluated for mechanical performance by tensile tests and ILSS and for electrical performance by measuring capacitance and dielectric breakdown voltage. The multifunctional materials shows good potential for replacing steel and other materials with lower specific mechanical properties but cannot match the high specific mechanical performance of mono-functional materials. Both mechanical and electrical performance could have large benefits from developing new separator materials adapted for use in multifunctional applications and could be an interesting field for extended research.

Place, publisher, year, edition, pages
Luleå: Luleå tekniska universitet, 2011. , 83 p.
Licentiate thesis / Luleå University of Technology, ISSN 1402-1757
Keyword [en]
Materials science - Functional materials, Materials science - Other material science
Keyword [sv]
Teknisk materialvetenskap - Funktionella material, Teknisk materialvetenskap - Övrig teknisk materialvetenskap
Research subject
Polymeric Composite Materials
URN: urn:nbn:se:ltu:diva-17913Local ID: 5d3c68b1-c822-401d-8af0-52791dce6e84ISBN: 978-91-7439-335-4 (print)OAI: diva2:990919
Godkänd; 2011; 20111031 (toncar); LICENTIATSEMINARIUM Namn: Tony Carlson Ämnesområde: Polymera konstruktionsmaterial/Polymeric Composite Materials Examinator: Adj professor Leif Asp, Luleå tekniska universitet Diskutant: Dr Patrik Fernberg, Swerea SICOMP AB, Piteå Tid: Måndag den 12 december 2011 kl 14.00 Plats: E246, Luleå tekniska universitetAvailable from: 2016-09-29 Created: 2016-09-29Bibliographically approved

Open Access in DiVA

fulltext(6712 kB)24 downloads
File information
File name FULLTEXT01.pdfFile size 6712 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Carlson, Tony
By organisation
Material Science

Search outside of DiVA

GoogleGoogle Scholar
Total: 24 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 32 hits
ReferencesLink to record
Permanent link

Direct link