Microwave sensors for scanning of sawn timber
2007 (English)Doctoral thesis, comprehensive summary (Other academic)
A microwave imaging sensor that measures the signal transmitted through a board was investigated with respect to the ability to predict the distribution of moisture and density in sawn lumber. Furthermore, the response from the sensor was related to strength properties of the boards. Multivariate statistics was used to relate the measured variables to various properties. A finite element model based on X-ray computed tomography images was developed to describe the interactions between microwaves and wood. The model made it possible to simulate the response from the sensor under varying conditions. The results show that microwaves can be used for prediction of density and moisture content. They can also be used for prediction of strength properties, mainly from the correlation to density, but also from the influence on microwaves of structural variations in the wood. The finite element model is useful in the evaluation of microwave sensors for wood, drying equipment or other applications where electromagnetic waves interact with wood.
Place, publisher, year, edition, pages
Luleå: Luleå tekniska universitet, 2007. , 40 p.
Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, ISSN 1402-1544 ; 2007:09
Research subject Wood Technology
IdentifiersURN: urn:nbn:se:ltu:diva-17598Local ID: 43b33b80-e1ed-11db-b0f8-000ea68e967bOAI: oai:DiVA.org:ltu-17598DiVA: diva2:990603
Godkänd; 2007; 20070403 (ysko)2016-09-292016-09-29Bibliographically approved