Change search
ReferencesLink to record
Permanent link

Direct link
Pulsed laser ablation studied using digital holographic interferometry
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Fluid and Experimental Mechanics.
2008 (English)Licentiate thesis, comprehensive summary (Other academic)
Abstract [en]

Pulsed digital holographic interferometry has been used to investigate the plume and the shock wave generated in the ablation process of a Q-switched Nd-YAG (lambda= 1064 nm and pulse duration = 12 ns) laser pulse on a polycrystalline Boron Nitride (PCBN) target under atmospheric air pressure. A special set-up based on using two synchronised wavelengths from the same laser for simultaneous processing and measurement has been used. Digital holograms were recorded for different time delays using collimated laser light (lambda= 532 nm) passed through the volume along the target. Numerical data of the integrated refractive index field were calculated and presented as phase maps showing the propagation of the shock wave and the plume generated by the process. Radon inversion has been used to estimate the 3D refractive index fields measured from the projections assuming rotational symmetry. Verification of the point explosion model has been done. The amount of released energy i.e. the part of the incident energy of the laser pulse that is eventually converted to a shock wave has been estimated. Shock wave front densities have been calculated from the reconstructed refractive index fields using the Gladstone-Dale equation. A comparison of the shock front density calculated from the reconstructed data and that calculated using the point explosion model at different time delays has been done. The comparison shows quite good agreement between the model and the experimental data. Finally the reconstructed refractive index field has been used to estimate the electron number density distribution within the laser induced plasma. The results show that pulsed digital holographic interferometry is a promising technique to study laser ablation processes. Different materials and laser parameters like wavelength, focusing, number of pulses can be studied in combinations with other techniques.

Place, publisher, year, edition, pages
Luleå tekniska universitet, 2008. , 21 p.
Licentiate thesis / Luleå University of Technology, ISSN 1402-1757 ; 2008:55
Research subject
Experimental Mechanics
URN: urn:nbn:se:ltu:diva-16989Local ID: 108e8550-e3be-11dd-981b-000ea68e967bOAI: diva2:989981
Godkänd; 2008; 20090116 (ysko)Available from: 2016-09-29 Created: 2016-09-29Bibliographically approved

Open Access in DiVA

fulltext(3447 kB)0 downloads
File information
File name FULLTEXT01.pdfFile size 3447 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Amer, Eynas
By organisation
Fluid and Experimental Mechanics

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

ReferencesLink to record
Permanent link

Direct link