Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Recycling of sludge and dust to the BOF converter cold bonded pelletizing
SSAB Tunnplåt AB.
SSAB Tunnplåt AB.
Luleå University of Technology, Department of Civil, Environmental and Natural Resources Engineering.
2004 (English)In: ISIJ International, ISSN 0915-1559, E-ISSN 1347-5460, Vol. 44, no 4, p. 770-776Article in journal (Refereed) Published
Abstract [en]

With the aim to increase the recycling of fine sludge and dust disposed normally in landfill, cold bonded pelletizing of the sludge and dust using cement as binder was investigated in laboratory scale as well as in the pilot scale pelletizing plant. The influence of BF flue dust, BOF fine sludge and oily mill scale sludge on the cold strength, capacity and reduction degree of cold bond pellets was studied experimentally on the basis of a statistical procedure. With a coarser representative particle size, oily mill scale sludge has the greatest effect on the cold strength. BF flue dust has a negative effect for increasing both the cold strength and capacity for levels of over 25% of the mixture. The BOF fine sludge has the positive effect on cold strength, while its interaction with BF flue dust has the negative effect on reduction degree. The results of pelletizing tests in pilot scale show that the maximum cold strength (TTH 94%) and capacity (13-15 t/h) of products is obtained at the conditions given by the optimal mixture design and cure time. The industrial tests on charging cold bonded pellets as burden material in the BOF converter were described. The charging weight of cold bonded pellets varied from 0.5 to 2.5 tons. The results of industrial tests indicated that the converter process was not subject to any adverse disturbances due to the addition of 2.5 tons of cold bonded pellets.

Place, publisher, year, edition, pages
2004. Vol. 44, no 4, p. 770-776
National Category
Metallurgy and Metallic Materials
Research subject
Process Metallurgy
Identifiers
URN: urn:nbn:se:ltu:diva-13698DOI: 10.2355/isijinternational.44.770Local ID: cf9888d0-8a18-11db-8975-000ea68e967bOAI: oai:DiVA.org:ltu-13698DiVA: diva2:986651
Note
Validerad; 2004; Bibliografisk uppgift: With the aim to increase the recycling of fine sludge and dust disposed normally in landfill, cold bonded pelletizing of the sludge and dust using cement as binder was investigated in laboratory scale as well as in the pilot scale pelletizing plant. The influence of BF flue dust, BOF fine sludge and oily mill scale sludge on the cold strength, capacity and reduction degree of cold bond pellets was studied experimentally on the basis of a statistical procedure. With a coarser representative particle size, oily mill scale sludge has the greatest effect on the cold strength. BF flue dust has a negative effect for increasing both the cold strength and capacity for levels of over 25% of the mixture. The BOF fine sludge has the positive effect on cold strength, while its interaction with BF flue dust has the negative effect on reduction degree. The results of pelletizing tests in pilot scale show that the maximum cold strength (TTH 94%) and capacity (13-15 t/h) of products is obtained at the conditions given by the optimal mixture design and cure time. The industrial tests on charging cold bonded pellets as burden material in the BOF converter were described. The charging weight of cold bonded pellets varied from 0.5 to 2.5 tons. The results of industrial tests indicated that the converter process was not subject to any adverse disturbances due to the addition of 2.5 tons of cold bonded pellets.; 20061128 (ysko)Available from: 2016-09-29 Created: 2016-09-29 Last updated: 2017-11-24Bibliographically approved

Open Access in DiVA

fulltext(946 kB)283 downloads
File information
File name FULLTEXT01.pdfFile size 946 kBChecksum SHA-512
665cb009e0f724fbab66944a0410caac4c0d49ffe1a3d8d38c64088f64022b074a83f8447adec46b275d00ea96ea1aa7445f15f9dc01f8321207490a6d79b84b
Type fulltextMimetype application/pdf

Other links

Publisher's full text

Search in DiVA

By author/editor
Robinson, Ryan
By organisation
Department of Civil, Environmental and Natural Resources Engineering
In the same journal
ISIJ International
Metallurgy and Metallic Materials

Search outside of DiVA

GoogleGoogle Scholar
Total: 283 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 56 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf