Effects of surface reinforcement on bearing capacity of concrete with anchor bolts
2011 (English)In: Nordic Concrete Research, ISSN 0800-6377, Vol. 2011, no 44, 161-174 p.Article in journal (Refereed) Published
66 tests of the influence of surface reinforcement on the tensile load capacity of cast-in fasteners have been carried through. In the tests threaded rods ∅30 mm with a ∅45 mm nut at the end were cast-in centrically in concrete slabs (1.2 m × 1.2 m × 0.3 m up to 2.2 m × 2.2 m × 0.6 m). The amount of surface reinforcement was varied from 0% up to about 1.2%. There is a considerable increase in the load capacity with surface reinforcement present. The increase depends on the geometry and the amount and placement of the reinforcement.
Place, publisher, year, edition, pages
2011. Vol. 2011, no 44, 161-174 p.
Civil engineering and architecture - Building engineering
Samhällsbyggnadsteknik och arkitektur - Byggnadsteknik
Research subject Structural Engineering
IdentifiersURN: urn:nbn:se:ltu:diva-7644Local ID: 60bbfb50-f732-4804-89c6-9ea48ee3241eOAI: oai:DiVA.org:ltu-7644DiVA: diva2:980534
Validerad; 2011; 20111215 (manil)2016-09-292016-09-29Bibliographically approved