Verification of field settlement of in-situ stabilized dredged sediments using cone penetration test data
2012 (English)In: The Electronic journal of geotechnical engineering, ISSN 1089-3032, E-ISSN 1089-3032, Vol. 17, no Y, 3665-3680 p.Article in journal (Refereed) Published
Utilization of in-situ mass stabilization for geotechnical applications is increasing. Laboratory tests may have drawbacks on valuations of engineering parameters for estimations of settlement of in-situ stabilized soil mass. Factors such as compression, mixing work, homogeneity and curing temperature may influence the differences in mechanical properties between laboratory test results and achieved field values. Therefore, utilization of appropriate in-situ mechanical parameters may be required during design analyses. Various in-situ tests are available for use in geotechnical context. Among others, cone penetration test (CPT) is one of most widely used in-situ tests. Numerous CPT empirical correlations are available for use in conventional soils. Utilization of such CPT empirical correlations for in-situ stabilized soils has to be examined. In this paper, the in-situ constrained modulus was evaluated using conventional CPT empirical correlation and utilized as oedometer modulus in finite element analysis for estimation of settlement of preloaded in-situ stabilized dredged sediments. The results show that, computed settlement values fall within the range of measured one. These findings suggest that, the cone penetration test and its empirical correlations, which were established for conventional soils, can also be utilized in stabilized soils.
Place, publisher, year, edition, pages
2012. Vol. 17, no Y, 3665-3680 p.
field settlement, cone penetration test, in-situ constrained modulus, finite element method, PLAXIS, in-situ stabilization, contaminated dredged sediments, preloading, Civil engineering and architecture - Geoengineering and mining engineering
Samhällsbyggnadsteknik och arkitektur - Geoteknik och gruvteknik
Research subject Soil Mechanics
IdentifiersURN: urn:nbn:se:ltu:diva-4566Local ID: 287cd609-08bc-4b50-a958-fca25f1fb166OAI: oai:DiVA.org:ltu-4566DiVA: diva2:977440
Validerad; 2013; 20121204 (makusa)2016-09-292016-09-29Bibliographically approved