Change search
ReferencesLink to record
Permanent link

Direct link
Development of localized electrochemical deposition
Uppsala University, Disciplinary Domain of Science and Technology, Technology, Department of Engineering Sciences, Applied Materials Sciences.
2016 (English)Independent thesis Advanced level (professional degree), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

In the manufacturing industry, parts are created with high demands on their mechanical properties. To avoid surface defects, components are over-dimensioned and then machined to the desired size. This will give rise to material waste and extra processing steps. Therefore, it is of interest to investigate methods to repair these surface defects without the need of over-dimensioning.

In this thesis work, different strategies for localized electrochemical deposition have been investigated with respect to their ability to perform local repair of surface defects. The concepts that have been studied include the application of a microanode, a confined bath, and of liquid marbles.

The different methods were tested and the process parameters were optimized to achieve good quality deposits at sufficient growth rates. The best deposits were then further characterized with respect to grain size distribution, crystal orientation and surface quality. The ability to repair a surface defect was also studied along with the possibility of producing thicker deposits. The confined bath method was the most promising concept. At a current density of 3.5 A/dm2, a good quality deposit was achieved. The crystal orientations proved to be random and the average grain size was 115 ± 61 nm. A surface defect with a depth of 33.0 µm and a width of 19.8 µm was successfully repaired using this local deposition method. However, the technique needs further development for the desired application in manufacturing industry.

Place, publisher, year, edition, pages
2016. , 33 p.
Series
UPTEC Q, ISSN 1401-5773 ; 16003
Keyword [en]
LECD, electrochemical, electrochemistry, deposition, localized, indentation, repairing, additive, manufacturing
National Category
Manufacturing, Surface and Joining Technology Metallurgy and Metallic Materials Chemical Process Engineering
Identifiers
URN: urn:nbn:se:uu:diva-302540OAI: oai:DiVA.org:uu-302540DiVA: diva2:958051
External cooperation
Chalmers tekniska högskola
Educational program
Master Programme in Materials Engineering
Presentation
2016-06-22, 4005, Ångströmlaboratoriet, Lägerhyddsvägen 1, Uppsala, 13:15 (Swedish)
Supervisors
Examiners
Available from: 2016-09-06 Created: 2016-09-05 Last updated: 2016-09-06Bibliographically approved

Open Access in DiVA

Development of localized electrochemical deposition(23443 kB)19 downloads
File information
File name FULLTEXT01.pdfFile size 23443 kBChecksum SHA-512
9a37af8a63af7043d08efe5ced194703ed556eeb77e7cdf7330135af155c53cace97e38ee37cb3df5621b9171a378f35bf065315ea3370348fc78c905d0bc89a
Type fulltextMimetype application/pdf

By organisation
Applied Materials Sciences
Manufacturing, Surface and Joining TechnologyMetallurgy and Metallic MaterialsChemical Process Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 19 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 85 hits
ReferencesLink to record
Permanent link

Direct link