Change search
ReferencesLink to record
Permanent link

Direct link
Finite element modeling of straightening of thin-walled seamless tubes of austenitic stainless steel
Dalarna University, School of Technology and Business Studies, Materials Technology.
2016 (English)Independent thesis Basic level (degree of Bachelor), 10 credits / 15 HE creditsStudent thesis
Abstract [en]

During this thesis work a coupled thermo-mechanical finite element model (FEM) was builtto simulate hot rolling in the blooming mill at Sandvik Materials Technology (SMT) inSandviken. The blooming mill is the first in a long line of processes that continuously or ingotcast ingots are subjected to before becoming finished products.

The aim of this thesis work was twofold. The first was to create a parameterized finiteelement (FE) model of the blooming mill. The commercial FE software package MSCMarc/Mentat was used to create this model and the programing language Python was used toparameterize it. Second, two different pass schedules (A and B) were studied and comparedusing the model. The two pass series were evaluated with focus on their ability to healcentreline porosity, i.e. to close voids in the centre of the ingot.

This evaluation was made by studying the hydrostatic stress (σm), the von Mises stress (σeq)and the plastic strain (εp) in the centre of the ingot. From these parameters the stress triaxiality(Tx) and the hydrostatic integration parameter (Gm) were calculated for each pass in bothseries using two different transportation times (30 and 150 s) from the furnace. The relationbetween Gm and an analytical parameter (Δ) was also studied. This parameter is the ratiobetween the mean height of the ingot and the contact length between the rolls and the ingot,which is useful as a rule of thumb to determine the homogeneity or penetration of strain for aspecific pass.

The pass series designed with fewer passes (B), many with greater reduction, was shown toachieve better void closure theoretically. It was also shown that a temperature gradient, whichis the result of a longer holding time between the furnace and the blooming mill leads toimproved void closure.

Place, publisher, year, edition, pages
Keyword [en]
finite element method, FEM, FEA, straightening of tube, arc height, ovalization, roller angle, plastic strain.
National Category
Materials Engineering
URN: urn:nbn:se:du-21463OAI: diva2:928913
Available from: 2016-05-17 Created: 2016-05-17 Last updated: 2016-09-27

Open Access in DiVA

fulltext(866 kB)0 downloads
File information
File name FULLTEXT02.pdfFile size 866 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Materials Technology
Materials Engineering

Search outside of DiVA

GoogleGoogle Scholar
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 18 hits
ReferencesLink to record
Permanent link

Direct link