Change search
ReferencesLink to record
Permanent link

Direct link
FEM model of impacts on blades
KTH, School of Industrial Engineering and Management (ITM), Energy Technology, Heat and Power Technology.
2016 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

In-service support engineers often have to answer derogations requests regarding impacts on compressor blades. The stress concentration factor is a physical quantity helping them to take the decisions : it is a measure of the local increase of the stress due to the impact. Several techniques already exist to derive it like Petersons' abaci giving it regarding the geometrical parameters of the impact. They are user friendly but conservative in practice. The most accurate method is zoom-calculation : a Finite Element Model is created to precisely measure the stress concentration factor. This effective approach is however very time-consuming. In between, Snecma engineers developed a few years ago a law on the form of abaci derived from a zoom-calculation results database. The main purpose of this thesis is to create laws regarding new geometrical parameters and increase the size of the database following on from the work already carried out. FEM models depending on various parameters are thus created to derive stress concentration factors. A deep difference from what has been done before rests on the method : a calculation chain is developed to get results on different sets of impact parameters. It enables to easily and quickly update the mesh on the models and thus to consider numerous defect geometries. The final results of the study are a set of abaci giving the stress concentration factor due to the impact regarding its geometrical parameters.

Place, publisher, year, edition, pages
2016. , 58 p.
National Category
Aerospace Engineering
URN: urn:nbn:se:kth:diva-185693OAI: diva2:922878
Subject / course
Aeronautical Engineering
Educational program
Master of Science in Engineering - Vehicle Engineering
Available from: 2016-04-26 Created: 2016-04-25 Last updated: 2016-04-26Bibliographically approved

Open Access in DiVA

fulltext(3218 kB)34 downloads
File information
File name FULLTEXT01.pdfFile size 3218 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Heat and Power Technology
Aerospace Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 34 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 46 hits
ReferencesLink to record
Permanent link

Direct link