Change search
ReferencesLink to record
Permanent link

Direct link
Fuel dispersion and bubble flow distribution in fluidized beds
University of Borås, School of Engineering.
2011 (English)Licentiate thesis, monograph (Other academic)
Abstract [en]

Fluidized bed technology is used for thermal conversion of solid fuels (combustion and gasification) and is especially suitable for conversion of low-rank fuels such as biomass and waste. The performance of fluidized bed units depends on the fuel mixing and fuel-gas contact. Thus, it is important to understand these two phenomena in order to develop models for reliable design and scale up of fluidized bed units. This work investigates, under conditions representative for industrial fluidized bed units, the lateral fuel mixing (in a unit with a cross section of 1.44 m2 both at hot and cold conditions) and the bubble flow distribution (in a 1.2 m-wide 2-dimensional unit). The work confirms previous findings on the formation of preferred bubble paths and shows that these bubble paths are enhanced by lowering the fluidization velocity, increasing the dense bed height and reducing the pressure drop across the gas distributor. From the fuel mixing experiments, an estimation of the lateral effective dispersion coefficient to values in the order of 10-3 m2/s is obtained under both hot and cold conditions. The experiments under cold conditions give additional qualitative information on the fuel mixing patterns such as flotsam/jetsam tendencies. The camera probe developed for fuel tracking under hot conditions enables to study the fuel dispersion under real operation at relevant industrial scales. Based on the characteristics of the bubble path flow, a model for the horizontal fuel dispersion on a macroscopic scale is formulated and shown to be able to give a good description of the experimental data. As opposed to the commonly applied diffusion-type modeling of the lateral solids dispersion, the proposed model facilitates integration with models of the bubble flow. Thus, the present modeling work is a first step to provide a modeling of the fuel dispersion, which uses as inputs only the main operational parameters of the fluidized bed.

Place, publisher, year, edition, pages
Chalmers University of Technology ; University of Borås , 2011.
Skrifter från Högskolan i Borås, ISSN 0280-381X ; 27
Keyword [en]
fluidised bed, fuel mixing, bubble distribution, digital image analysis, particle tracking
Keyword [sv]
Energi och material
National Category
Chemical Process Engineering
Research subject
Resource Recovery
URN: urn:nbn:se:hb:diva-3580Local ID: 2320/7978OAI: diva2:876970
Available from: 2015-12-04 Created: 2015-12-04 Last updated: 2016-03-14

Open Access in DiVA

fulltext(3366 kB)46 downloads
File information
File name FULLTEXT01.pdfFile size 3366 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
School of Engineering
Chemical Process Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 46 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 8 hits
ReferencesLink to record
Permanent link

Direct link