Parameter analysis of creep models of PP/CaCo3 nanocomposites
Independent thesis Advanced level (degree of Master (One Year))Student thesis
The present report is about the parameter analysis of creep models of Nanocomposites (Isotactic polypropylene and CaCo3).The parametric analysis of the nanocomposites under creep was carried out, and the parameters related to creep model are determined by comparing to the experimental results. The influence of these parameters on the creep was studied. Using commercially available software ABAQUS, Finite Element Calculations were done for elastic and creep conditions. The results obtained from theoretical analysis were verified with the Experimental Results. Also Abaqus results are compared with the Experimental results.
Place, publisher, year, edition, pages
2007. , 68 p.
Creep strain, PP/CaCO3, Nanocomposites, FEM.
IdentifiersURN: urn:nbn:se:bth-4308Local ID: oai:bth.se:arkivex3080C20972E678D4C12572F1005431E4OAI: oai:DiVA.org:bth-4308DiVA: diva2:831640
Walter, Dr.Sharon Kao