Change search
ReferencesLink to record
Permanent link

Direct link
Sensitivity study of control rod depletion coefficients
Uppsala University, Disciplinary Domain of Science and Technology, Physics, Department of Physics and Astronomy, Applied Nuclear Physics.
2015 (English)Independent thesis Advanced level (professional degree), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

This report investigates the sensitivity of the control rod depletion coefficients, Sg, to different input parameters and how this affects the accumulated 10B depletion, β. Currently the coefficients are generated with PHOENIX4, but the geometries can be more accurately simulated in McScram. McScram is used to calculate Control Rod Worth, which in turn is used to calculate Nuclear End Of Life, and Sg cannot be generated in the current version of McScram. Therefore, it is also analyzed whether the coefficients can be related to CRW and thus be studied indirectly through it. Simulations of the coefficients were done in PHOENIX4, simulations of CRW were done in both PHOENIX4 and McScram and simulations of β were done in POLCA7. All simulations were performed for a CR99 in a BWR reactor.

The control rod coefficients were found to be sensitive to the enrichment of the fuel, void fraction of the water and the width of the gap, and these effects were also seen in the results of β. As a result, one of three steps could be taken. First, the parameter values should not be set arbitrarily, instead default values could be chosen such that Sg is calculated more accurately. Second, a set of tables of Sg could be generated for different parameter values so that β can be calculated with Sg from the current conditions, although this would mean that PHOENIX4 needs to be updated. Third, McScram can be updated to be able to calculate Sg directly.

It has been concluded that Sg cannot be studied indirectly through CRW since the trends and the sensitivity to the different parameters were not consistent between Sg, CRW calculated with PHOENIX4 and CRW calculated with McScram, where PHOENIX4 was more sensitive than McScram. The results can instead be used to bench-mark the PHOENIX4 results.

Place, publisher, year, edition, pages
UPTEC F, ISSN 1401-5757 ; 15032
Keyword [en]
nuclear power, control rod, control rods, depletion
Keyword [sv]
kärnkraft, styrstav, styrstavar, utbränning
National Category
Other Physics Topics
URN: urn:nbn:se:uu:diva-256092OAI: diva2:824612
External cooperation
Educational program
Master Programme in Engineering Physics
Available from: 2015-06-23 Created: 2015-06-22 Last updated: 2015-06-23Bibliographically approved

Open Access in DiVA

fulltext(1006 kB)61 downloads
File information
File name FULLTEXT01.pdfFile size 1006 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Applied Nuclear Physics
Other Physics Topics

Search outside of DiVA

GoogleGoogle Scholar
Total: 61 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 307 hits
ReferencesLink to record
Permanent link

Direct link