Change search
ReferencesLink to record
Permanent link

Direct link
Karaktärisering av hårdmetallpulvrets råvaror och dess påverkan på pulvrets flödesegenskaper
Uppsala University, Disciplinary Domain of Science and Technology, Technology, Department of Engineering Sciences.
2015 (Swedish)Independent thesis Basic level (professional degree), 10 credits / 15 HE creditsStudent thesis
Abstract [en]

This thesis has been done at the powder department (GH) at AB Sandvik Coromant in Gimo. With a rheometer measurements has been made on raw materials and powder blends. The focus of this report has been to find correlations between raw material powders and press data, comparisons have also been made between raw materials and powder blends.

The rheometer can show information of how a powder act in flow conditions, together with air and with pressure. Analyses has been done comparing the rheometer data with press parameters (for example: rejected orders, weight variations and the compaction pressure) with the goal to find correlations between the powders flow properties and the powders compaction in production.

The measurements and analyses have been showing that the powder flow properties depends on the powders composition and that properties like flow rate, aeration and permeability varies between powder blends and batches of the same powder sort. It seems to exist a correlation between the pressure force and the flow rate of a raw material. This flow rate seems to belong together with the flow rate of the powder blend. No correlations were found between the rheometer measurements and press rejections, weight variations and hall flow values.

The statistical analyses that has been used in this report consist of a few number of measured values and for the analyses to be statistic correct it is necessary to have a larger sample in the analyses.

Place, publisher, year, edition, pages
2015. , 33 p.
Keyword [sv]
rheometer, pulverflöde, aeration, permeabilitet, råvara, presstryck
National Category
Mechanical Engineering
URN: urn:nbn:se:uu:diva-253112ISRN: UTH-INGUTB-EX-M-2015/02-SEOAI: diva2:812888
External cooperation
Sandvik Coromant
Educational program
Bachelor Programme in Mechanical Engineering
Available from: 2015-05-20 Created: 2015-05-20 Last updated: 2015-05-20Bibliographically approved

Open Access in DiVA

fulltext(1555 kB)471 downloads
File information
File name FULLTEXT01.pdfFile size 1555 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Department of Engineering Sciences
Mechanical Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 471 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 435 hits
ReferencesLink to record
Permanent link

Direct link