Change search
ReferencesLink to record
Permanent link

Direct link
Expanding the brush tire model for energy studies
KTH, School of Engineering Sciences (SCI), Aeronautical and Vehicle Engineering, Vehicle Dynamics.
2014 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

Considering the more and more important issues concerning the climate changes and the global warming, the automotive industry is paying more and more attention to vehicle concepts with full electric or partly electric propulsion systems. The introduction of electric power sources allow the designers to implement more

advanced motion control systems in vehicle, such as active suspensions. An example of this concept is the Autonomous corner module (ACM), designed by S. Zetterström. The ACM is a modular based suspension system that includes all features of wheel control, such as control of steering, wheel torque and camber

individually, using electric actuators. With a good control strategy it is believed that is it possible to reduce the fuel consumption and/or increase the handling properties of the vehicle.

In particular, camber angle has a significant effect on vehicle handling. However, very few efforts have been done in order to analyse its effects on tire dissipated energy.

The aim of this study is to develop a new tire model, having as starting point the simple Brush Tire model, in order to analyse the tire behaviour, in terms of forces generated and energy dissipated, for different dynamic situations. In order to reach this scope, the characteristic equations of the rubber material are implemented

in a 3D Multi-Line brush tire model. In this way the energy dissipated, thus the rolling resistance force, can be studied and analysed, considering also the tire geometry.

From the results of this work it is possible to assert that the angular parameters (e.g. camber angle) affect the power losses in rolling tires, as well as the tire geometry influences their rolling resistance. Thus, using a good control strategy, it is possible to reduce the power losses in tires.

Place, publisher, year, edition, pages
2014. , 96 p.
TRITA-AVE, ISSN 1651-7660 ; 2014:36
Keyword [en]
Multi-Line Brush Tire model, Masing model, rolling resistance
National Category
Engineering and Technology
URN: urn:nbn:se:kth:diva-164284OAI: diva2:805263
Available from: 2015-04-15 Created: 2015-04-15 Last updated: 2015-04-15Bibliographically approved

Open Access in DiVA

fulltext(2352 kB)603 downloads
File information
File name FULLTEXT01.pdfFile size 2352 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Vehicle Dynamics
Engineering and Technology

Search outside of DiVA

GoogleGoogle Scholar
Total: 603 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 211 hits
ReferencesLink to record
Permanent link

Direct link