Exploring climate impacts of timber buildings: The effects from including non-traditional aspects in life cycle impact assessment
2015 (English)Licentiate thesis, comprehensive summary (Other academic)
There is an urgency within the building sector to reduce its greenhouse gas emissions and mitigate climate change. An increased proportion of biobased building materials in construction is a potential measure to reduce these emissions. Life cycle assessment (LCA) has often been applied to compare the climate impact from biobased materials with that from e.g. mineral based materials, mostly favouring biobased materials. Contradicting results have however been reported due to differences in methodology, as there is not yet consensus regarding certain aspects. The aim of this thesis is to study the implications from non-traditional practices in climate impact assessment of timber buildings, and to discuss the shortcomings of current practices when assessing such products and comparing them with non-renewable alternatives.
The traditional practices for climate impact assessment of biobased materials have been identified, and then applied to a case study of a building with different timber frame designs and an alternative building with a concrete frame. Then, non-traditional practices were explored by calculating climate impact results using alternative methods to handle certain methodological aspects, which have been found relevant for forest products in previous research such as the timing of emissions, biogenic emissions, carbon storage in the products, end-of-life substitution credits, soil carbon disturbances and change in albedo. These alternative practices and their implications were also studied for low-carbon buildings.
The use of non-traditional practices can affect the climate impact assessment results of timber buildings, and to some extent the comparison with buildings with lower content of biobased building materials. This effect is especially evident for energy-efficient buildings. Current normal practices tend to account separately for forest-related carbon flows and aspects such as biogenic carbon emissions and sequestration or effects from carbon storage in the products, missing to capture the forest carbon cycle as a whole. Climate neutrality of wood-based construction materials seems like a valid assumption for studies which require methodological simplification, while other aspects such as end-of-life substitution credits, soil carbon disturbances or changes in albedo should be studied carefully due to their potentially high implications and the uncertainties around the methods used to account for them. If forest phenomena are to be included in LCA studies, a robust and complete model of the forest carbon cycle should be used. Another shortcoming is the lack of clear communication of the way some important aspects were handled.
Place, publisher, year, edition, pages
Stockholm: KTH Royal Institute of Technology, 2015. , xvi, 31 p.
TRITA-BYMA, ISSN 0349-5752 ; 2015:1
life cycle assessment (LCA), timber buildings, biobased building materials, low-energy buildings, forest products, climate impact assessment, biogenic emissions, carbon storage, timing of emissions
Research subject Industrial Ecology; Civil and Architectural Engineering
IdentifiersURN: urn:nbn:se:kth:diva-161193OAI: oai:DiVA.org:kth-161193DiVA: diva2:793941
2015-03-17, SP Conference room 3, Drottning Kristinas väg 45, Stockholm, 10:00 (English)
Janssen, Matty, Teknologie doktor
Wålinder, Magnus, Professor
QC 201503102015-03-102015-03-092015-03-10Bibliographically approved
List of papers