Noise Emission of a 200 kW Vertical Axis Wind Turbine
2016 (English)In: Energies, ISSN 1996-1073, E-ISSN 1996-1073, Vol. 9, no 1, 19Article in journal (Refereed) Published
The noise emission from a vertical axis wind turbine (VAWT) has been investigated. A noisemeasurement campaign on a 200 kW straight-bladed VAWT has been conducted, and the result hasbeen compared to a semi-empirical model for turbulent-boundary-layer trailing edge (TBL-TE) noise.The noise emission from the wind turbine was measured, at wind speed 8 m/s, 10 m above ground, to96.2 dBA. At this wind speed, the turbine was stalling as it was run at a tip speed lower than optimaldue to constructional constraints. The noise emission at a wind speed of 6 m/s, 10 m above groundwas measured while operating at optimum tip speed and was found to be 94.1 dBA. A comparisonwith similar size horizontal axis wind turbines (HAWTs) indicates a noise emission at the absolutebottom of the range. Furthermore, it is clear from the analysis that the turbulent-boundary-layertrailing-edge noise, as modeled here, is much lower than the measured levels, which suggests thatother mechanisms are likely to be important, such as inflow turbulence.
Place, publisher, year, edition, pages
Basel: MDPI , 2016. Vol. 9, no 1, 19
vertical axis wind turbine (VAWT), H-rotor, noise, noise emission, sound power level
IdentifiersURN: urn:nbn:se:hh:diva-27523DOI: 10.3390/en9010019OAI: oai:DiVA.org:hh-27523DiVA: diva2:781889