Module property verification: A method to plan and perform quality verifications in modular architectures
2006 (English)Doctoral thesis, monograph (Other academic)
Modular product architectures have generated numerous benefits for companies in terms of cost, lead-time and quality. The defined interfaces and the module’s properties decrease the effort to develop new product variants, and provide an opportunity to perform parallel tasks in design, manufacturing and assembly. The background of this thesis is that companies perform verifications (tests, inspections and controls) of products late, when most of the parts have been assembled. This extends the lead-time to delivery and ruins benefits from a modular product architecture; specifically when the verifications are extensive and the frequency of detected defects is high. Due to the number of product variants obtained from the modular product architecture, verifications must handle a wide range of equipment, instructions and goal values to ensure that high quality products can be delivered. As a result, the total benefits from a modular product architecture are difficult to achieve.
This thesis describes a method for planning and performing verifications within a modular product architecture. The method supports companies by utilizing the defined modules for verifications already at module level, so called MPV (Module Property Verification). With MPV, defects are detected at an earlier point, compared to verification of a complete product, and the number of verifications is decreased.
The MPV method is built up of three phases. In Phase A, candidate modules are evaluated on the basis of costs and lead-time of the verifications and the repair of defects. An MPV-index is obtained which quantifies the module and indicates if the module should be verified at product level or by MPV. In Phase B, the interface interaction between the modules is evaluated, as well as the distribution of properties among the modules. The purpose is to evaluate the extent to which supplementary verifications at product level is needed. Phase C supports a selection of the final verification strategy. The cost and lead-time for the supplementary verifications are considered together with the results from Phase A and B.
The MPV method is based on a set of qualitative and quantitative measures and tools which provide an overview and support the achievement of cost and time efficient company specific verifications. A practical application in industry shows how the MPV method can be used, and the subsequent benefits
Place, publisher, year, edition, pages
Stockholm: KTH , 2006. , x, 252 p.
TRITA-IIP, ISSN 1650-1888 ; 06:03
modular products, product architecture, product verification, test, inspection, product assembly, defects
Production Engineering, Human Work Science and Ergonomics
IdentifiersURN: urn:nbn:se:du-16418OAI: oai:DiVA.org:du-16418DiVA: diva2:764265
2006-05-22, Sal M3, Brinellvägen 64, Stockholm, 10:00
Hanisch, Christoph, Dr
QC 201009062014-11-252014-11-182014-11-25Bibliographically approved