The measurement of weld toe radius using three non-destructive techniques
2014 (English)In: Proceedings of The 6th International Swedish Production Symposium 201416-18 September 2014 / [ed] Johan Stahre, Björn Johansson,Mats Björkman, 2014, 1-8 p.Conference paper (Refereed)
The three non-destructive methods Weld Impression Analysis, Laser Scanning Profiling and Structured Light Projection were employed to measure the weld toe radius of fillet welds. All three methods could be used succesfully but results are dependent on evaluation procedure. The results show that the weld toe geometry cannot be considered uniform and varies along the weld. It was also found that the measured weld toe radii do not vary significantly with minor variations ofthe surface profile orientation.
Place, publisher, year, edition, pages
2014. 1-8 p.
Weld toe radius, Weld Impression Analysis, Laser Scanning Profiling, Structured Light Projection.
Manufacturing, Surface and Joining Technology
Research subject ENGINEERING, Manufacturing and materials engineering
IdentifiersURN: urn:nbn:se:hv:diva-6703ISBN: 978-91-980974-1-2OAI: oai:DiVA.org:hv-6703DiVA: diva2:748510
6th International Swedish Production Symposium 2014