Operatörsunderhåll: Ett examensarbete om att använda 5S till hjälp för att förbättra operatörsunderhållet
Independent thesis Basic level (university diploma), 5 credits / 7,5 HE creditsStudent thesis
As the final course in the education “University Diploma Programme for Process Operators” there is a thesis in cooperation with a company required.This thesis is about operator maintenance and 5S made at Metsä Board in Husum.In this report you can read my opinions and conclusions based on literature studies and the interviews that have been made with the staff at PM6 (the paper machine).I chose to focus on the theory of lean, 5S and operator maintenance because it covers the area of this thesis.The operators shall do their rounds to make sure that the equipment works fine. They shall also write down things that they notice in a checklist. This is not done as it should be and the question is: can this be solved by using 5S?My conclusion of this thesis are:Better review of the task so that everyone is involved. The equipment should be clearly marked, and to digitize - for example, with an NFC tag the checklist is automatically filled in by the operator standing nearby the machine. The motivation of the operators will be increased if they are given feedback and clear objectives.
Place, publisher, year, edition, pages
2014. , 20 p.
5S, Lean, Operatörsunderhåll, förebyggande underhåll, pappersindustri
Other Engineering and Technologies
IdentifiersURN: urn:nbn:se:umu:diva-91584OAI: oai:DiVA.org:umu-91584DiVA: diva2:737112
Metsä Board Husum
University Diploma Programme for Process Operators