Change search
ReferencesLink to record
Permanent link

Direct link
Binder-free oxide nanotube electrodes for high energy and power density 3D Li-ion microbatteries
Uppsala University, Disciplinary Domain of Science and Technology, Chemistry, Department of Chemistry - Ångström, Structural Chemistry.
2014 (English)Independent thesis Advanced level (professional degree), 20 credits / 30 HE creditsStudent thesisAlternative title
Titanbaserade nanotuber för tredimensionella elektoder i litiumjonbatterier (Swedish)
Abstract [en]

This thesis covers synthesis and characterisation of TiO2 nanotubes and TiO2 / Li4Ti5O12 composite nanotubes. The aim was to build batteries with high areal capacity and good rate capability. TiO2 nanotubes were synthesized by two step anodization of titanium metal foil and the composite electrodes were synthesized through electrochemical lithiation of TiO2 nanotubes. To improve the battery performance the TiO2 nanotubes were annealed at 350 °C in air atmosphere, while the composite electrodes were annealed in argon at 550 °C. The longest TiO2 nanotubes were measured to 42.5 μm. The 40 μm long nanotubes displayed an areal capacity of 1.0 mAh/cm2 and a gravimetric capacity of 89 mAh/g. Nanotubes having a length of 10 μm had an areal capacity of 0.33 mAh/cm2 and a gravimetriccapacity of 130 mAh/g. When cycled at high rates, 10C, the capacity of the 40 μm nanotubes was 0.25 mAh/cm2, using a current density of 9.3 mA. The capacity of the 40 μm long nanotubes were higher than for the 10 μm long, but the increase was not proportional to the increase in length. A composite electrode was successfully synthesized and was found to have a capacity of 0.25 mAh/cm2 at a rate of C/5.

Place, publisher, year, edition, pages
2014. , 38 p.
UPTEC Q, ISSN 1401-5773 ; 14005
Keyword [en]
Titanium dioxide, nanotubes, lithium ion batteries, microbatteries
National Category
Materials Engineering
URN: urn:nbn:se:uu:diva-227451OAI: diva2:729688
Educational program
Master Programme in Materials Engineering
Available from: 2014-07-02 Created: 2014-06-26 Last updated: 2014-07-02Bibliographically approved

Open Access in DiVA

fulltext(3314 kB)263 downloads
File information
File name FULLTEXT01.pdfFile size 3314 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Structural Chemistry
Materials Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 263 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 1395 hits
ReferencesLink to record
Permanent link

Direct link