Change search
ReferencesLink to record
Permanent link

Direct link
Konstruktion av lapputmatningsmaskin
Halmstad University, School of Business and Engineering (SET), Mechanical Engineering and Industrial Design (MTEK).
Halmstad University, School of Business and Engineering (SET), Mechanical Engineering and Industrial Design (MTEK).
2014 (Swedish)Independent thesis Basic level (university diploma), 10 credits / 15 HE creditsStudent thesis
Abstract [en]

The vision of this thesis was to create a concept that can be used as a base for amachine construction. The purpose of this project was to use different methods todevelop a concept that on the best way meets the sat up requirements. This projecthas been divided into three stages/parts; principle, primary and the final solutionstage.This thesis has been conducted in collaboration with Västkustägg AB. It is aconstruction project designed to construct a machine that will automatically putlabels on the egg packages. Västkust AB wanted to automate this process. Thecompany has only tested this process earlier by an operator who did this jobmanually.We came up with different solution during this project. The assessments of theseconcepts were made after Olsson's (1995) method and together with Terje Olsson- our supervisor at the company, later during the project. During the last stage ofthis project we chose to go with one final concept for a further developing. Alldemands made by the company were followed throughout the working process.We managed to develop a machine containing few and simple components, whichat the same time are very functional for its purpose. The design of our machine isdifferent from other industrial machines and labeling machines which makes itunique in its own way. This machine is meant for labels of two standard types ofpaper A5 and A6.The calculations we made during this project have been done in Catia V5 and hasbeen verified. We had a clear image of how our ideas should be in the beginningof this project and we knew how we wanted them to be we used our own theoriesand approaches in practice. Our theories and ideas showed in our sketches andprototypes. This along with other methods led to our final concept.We had also built some prototypes to be able to see if our ideas work in practice.The prototype led to some changes in our concepts. It gave us experience inprototype creating, functionality of the ideas and other areas.

Place, publisher, year, edition, pages
2014. , 75 p.
Keyword [en]
Machinedesign, Machine, product, productdesign, label machine
Keyword [sv]
Konstruktion, lapputmatningsmaskin, maskin, design, produktutveckling
National Category
Other Mechanical Engineering Production Engineering, Human Work Science and Ergonomics
URN: urn:nbn:se:hh:diva-25764OAI: diva2:727203
Subject / course
Mechanical Engineering
Available from: 2014-06-26 Created: 2014-06-19 Last updated: 2014-06-26Bibliographically approved

Open Access in DiVA

fulltext(5125 kB)209 downloads
File information
File name FULLTEXT01.pdfFile size 5125 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Mechanical Engineering and Industrial Design (MTEK)
Other Mechanical EngineeringProduction Engineering, Human Work Science and Ergonomics

Search outside of DiVA

GoogleGoogle Scholar
Total: 209 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 189 hits
ReferencesLink to record
Permanent link

Direct link