Change search
ReferencesLink to record
Permanent link

Direct link
Polymer modification of bitumen: Advances and challenges
KTH, School of Architecture and the Built Environment (ABE), Transport Science, Highway and Railway Engineering.
KTH, School of Architecture and the Built Environment (ABE), Transport Science, Highway and Railway Engineering.ORCID iD: 0000-0003-0889-6078
KTH, School of Architecture and the Built Environment (ABE), Transport Science, Highway and Railway Engineering.ORCID iD: 0000-0003-3968-6778
2014 (English)In: European Polymer Journal, ISSN 0014-3057, E-ISSN 1873-1945, Vol. 54, no 1, 18-38 p.Article, review/survey (Refereed) Published
Abstract [en]

Advances and challenges in the field of bitumen polymer modification for road construction during the last 40 years are reviewed in this paper. The history of bitumen polymer modification is described chronologically. Some popular plastomers and thermoplastic elastomers in bitumen modification are discussed regarding their advantages and disadvantages, including polyethylene (PE), polypropylene (PP), ethylene-vinyl acetate (EVA), ethylene-butyl acrylate (EBA), styrene-butadiene-styrene (SBS), styrene-isoprene-styrene (SIS) and styrene-ethylene/butylene-styrene (SEBS). Although these polymers all improve bitumen properties to some extent, there are still some drawbacks limiting the future development of bitumen polymer modification, such as high cost, low ageing resistance and poor storage stability of polymer modified bitumen (PMB). Researchers attempted various ways to remove these drawbacks. Some technical developments for removing drawbacks are reviewed in this paper, including saturation, sulfur vulcanization, adding antioxidants, using hydrophobic clay minerals, functionalization and application of reactive polymers. The future development of polymers for bitumen modification is analyzed as well. Since it is currently challenging to perfectly achieve all expected PMB properties at the same time, some compromised recommendations are given in this paper, among which greatly enhancing the properties with an acceptably high cost, significantly reducing the cost with relatively poor properties and their combinations. Functionalization is emphasized as a promising way to enhance the properties of currently used polymers and develop new-type polymer modifiers with much greater success in the future. It is also recommended that future research on bitumen polymer modification focuses more on function development towards enhancing: adhesion with aggregates, long-term performance and recyclability.

Place, publisher, year, edition, pages
Elsevier, 2014. Vol. 54, no 1, 18-38 p.
Keyword [en]
Advance, Challenge, Future development, Polymer modified bitumen
National Category
Infrastructure Engineering Polymer Technologies
Research subject
Transport Science
URN: urn:nbn:se:kth:diva-144175DOI: 10.1016/j.eurpolymj.2014.02.005ISI: 000336111000003ScopusID: 2-s2.0-84898809979OAI: diva2:711917

QC 20140612

Available from: 2014-04-11 Created: 2014-04-10 Last updated: 2015-04-09Bibliographically approved
In thesis
1. Towards a Viscoelastic Model for Phase Separation in Polymer Modified Bitumen
Open this publication in new window or tab >>Towards a Viscoelastic Model for Phase Separation in Polymer Modified Bitumen
2015 (English)Licentiate thesis, comprehensive summary (Other academic)
Abstract [en]

In this thesis, a review is given on the most popular polymers used today for polymer modification of bitumen. Furthermore, the development of a model for phase separation in polymer modified bitumen (PMB) is proposed, that will enable a better control and understanding of PMB phase behaviour, allowing thus to enhanced long-term performance. PMB is hereby considered as a blend and focus is placed on its structure, its equilibrium thermodynamics and its phase separation dynamics. The effects of dynamic asymmetry on phase separation in PMB are analysed with related theories and some image data. Based on the discussion in this thesis, it is concluded that the effects of dynamic asymmetry between bitumen and polymer should be taken into consideration when studying phase separation in PMB. By analysing related literature and image data, it is found that some features of viscoelastic phase separation are shown during the phase separation process in some PMBs. It is therefore possible and useful to develop a viscoelastic model for PMB to describe its phase separation behaviour. In this, the stress-diffusion coupling is expected to play a key role in the model. Finally, recommendations are made towards the future research which is needed to realize the proposed model.

Place, publisher, year, edition, pages
Stockholm: KTH Royal Institute of Technology, 2015. v, 26 p.
TRITA-BKN. Bulletin, ISSN 1103-4270 ; 130
Polymer modified bitumen; storage stability; viscoelastic phase separation; PMB model
National Category
Infrastructure Engineering
Research subject
Civil and Architectural Engineering
urn:nbn:se:kth:diva-163540 (URN)978-91-7595-503-2 (ISBN)
2015-04-20, B1, Brinellvägen 23, Stockholm, 13:00 (English)

QC 20150409

Available from: 2015-04-09 Created: 2015-04-07 Last updated: 2015-04-09Bibliographically approved

Open Access in DiVA

Accepted version - Polymer modification of bitumen: Advances and challenges(2134 kB)10913 downloads
File information
File name FULLTEXT01.pdfFile size 2134 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Other links

Publisher's full textScopus

Search in DiVA

By author/editor
Zhu, JiqingBirgisson, BjörnKringos, Niki
By organisation
Highway and Railway Engineering
In the same journal
European Polymer Journal
Infrastructure EngineeringPolymer Technologies

Search outside of DiVA

GoogleGoogle Scholar
Total: 10913 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 1102 hits
ReferencesLink to record
Permanent link

Direct link