Designing and measurement of routing module for transceiver system at 3.125GHz
Independent thesis Advanced level (degree of Master (Two Years)), 80 credits / 120 HE creditsStudent thesis
This report intends to impart a good understanding of routing modules used in modern transceiver systems. The radar system at RadarBolaget AB needed to have a good routing module for its newly designed transceiver antenna. In this report, studies have been done related to two majorly used routing modules in modern electronics industry; Microwave Circulator and RF/Microwave Switch. First off, different characteristics of routing modules are discussed. After having discussed important design parameters, practical design considerations for two routing modules are presented in a profound way. Theoretical knowledge for both of these two devices is presented in the beginning, followed by their practical designs using standard simulation software like HFSS and ADS. The report concludes its findings in a way that at the end of this report, reader becomes acquainted with ample information to be able to choose the best option available among all of the discussed designs. An FET RF Switch is chosen at the end of this project to be used for transceiver system which should be able to satisfy specifications specified by RadarBolaget AB. This project was carried out by two students of Master Program in Electronics/Telecommunications at Högskolan i Gävle in collaboration with RadarBolaget AB, Gävle, Sweden.
Place, publisher, year, edition, pages
2014. , 57 p.
Microwave Circulator, RF Switch, Transceiver system
Telecommunications Other Electrical Engineering, Electronic Engineering, Information Engineering
IdentifiersURN: urn:nbn:se:hig:diva-16252OAI: oai:DiVA.org:hig-16252DiVA: diva2:693064
Subject / course
Electronics/Telecommunications – master’s programme (two years) (swe or eng)
2014-01-23, 11:320, Högskolan i Gävle, Gävle, 09:00 (English)
Chilo, Jose, Head of Research