Change search
ReferencesLink to record
Permanent link

Direct link
The effect of combined high level acoustic excitation and bias flow on the acoustic properties of an in-duct orifice (AIAA 2013-2128)
KTH, School of Industrial Engineering and Management (ITM), Centres, Competence Center for Gas Exchange (CCGEx). KTH, School of Engineering Sciences (SCI), Aeronautical and Vehicle Engineering, Marcus Wallenberg Laboratory MWL.
KTH, School of Engineering Sciences (SCI), Centres, Linné Flow Center, FLOW. KTH, School of Engineering Sciences (SCI), Aeronautical and Vehicle Engineering, Marcus Wallenberg Laboratory MWL.ORCID iD: 0000-0002-8474-8563
2013 (English)In: 19th AIAA/CEAS Aeroacoustics Conference, American Institute of Aeronautics and Astronautics, 2013, 1-13 p.Conference paper (Refereed)
Abstract [en]

This paper investigates the acoustic properties of an orifice with bias flow under medium and high sound level excitation. Orifices with two different edge configurations were tested experimentally.The study includes a wide range of bias flow velocities, various acoustic excitation levels and different frequencies. The so-called Cummings equation was the starting point for the theoretical modelling. It was modified and a novel orifce acoustic discharge coefficient model was developed both for cases with and without bias flow. The model was experimentally validated. With this model the acoustic resistance is obtained by the harmonic balance method, and the results agree fairly well with the experimental results for low frequencies. Experimental results also show that bias flow makes the acoustic properties much more complex compared to the no bias flow case, especially when the velocity ratio between acoustic particle velocity and mean flow velocity is near unity.  

Place, publisher, year, edition, pages
American Institute of Aeronautics and Astronautics, 2013. 1-13 p.
National Category
Fluid Mechanics and Acoustics
URN: urn:nbn:se:kth:diva-128456DOI: 10.2514/6.2013-2128ScopusID: 2-s2.0-84883703222OAI: diva2:647630
19th AIAA/CEAS Aeroacoustics Conference, 27-29 May, 2013, Berlin, Germany

QC 20131016

Available from: 2013-09-11 Created: 2013-09-11 Last updated: 2015-05-22Bibliographically approved
In thesis
1. Acoustic characterization of orifices and perforated liners with flow and high-level acoustic excitation
Open this publication in new window or tab >>Acoustic characterization of orifices and perforated liners with flow and high-level acoustic excitation
2015 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

This thesis is motivated by the need for noise control in aircraft engine with orifices and perforated liner. The presence of high-level acoustic excitation, different flow situations either bias flow, grazing flow or any combination in the aircraft engine, makes the acoustic behavior complex due to the interaction between sound and flow over the lined wall. Both systematic acoustic prediction of aircraft engines and liner optimization necessitate progress in impedance measurement methods by including the effect of the complex flow situations. The aim of the present thesis is to experimentally study the change in acoustic properties of orifices and perforated liners under bias or grazing flow.

In order to study the effect of different combinations of bias flow and high-level acoustic excitation, an in-duct orifice has been investigated with finely controlled acoustic excitation levels and bias flow speeds. This provides a detailed study of the transition from cases when high-level acoustic excitation causes flow reversal in the orifice to cases when the bias flow maintains the flow direction. Nonlinear impedance is measured and compared, and a scattering matrix and its eigenvalues are investigated to study the potentiality of acoustic energy dissipation or production. A harmonic method is proposed for modelling the impedance, especially the resistance, which captures the change in impedance results at low frequencies compared with experimental results.

The presence of grazing flow can increase the resistance of acoustic liners and shift their resonator frequency. So-called impedance eduction technology has been widely studied during the past decades, but with a limited confidence due to the interaction of grazing flow and acoustic waves. A comparison has been performed with different test rigs and methods from the German Aerospace Center (DLR). Numerical work has been performed to investigate the effect of shear flow and viscosity. Our study indicates that the impedance eduction process should be consistent with that of the code of wave propagation computation, for example with the same assumption regarding shear flow and viscosity. A systematic analysis for measurement uncertainties is proposed in order to understand the essentials for data quality assessment and model validation. The idea of using different Mach numbers for wave dispersion and in the Ingard-Myers boundary condition has been tested regarding their effect on impedance eduction. In conclusion, a local Mach number based on friction velocity is introduced and validated using both our own experimental results and those of previous studies.  

Place, publisher, year, edition, pages
Stockholm: KTH Royal Institute of Technology, 2015. vi, 61 p.
TRITA-AVE, ISSN 1651-7660 ; 2015:26
Bias Flow, Grazing Flow, Nonlinear Acoustics, Acoustic Impedance, Impedance Eduction, Single Mode Straightforward Method, Uncertainty Analysis, LEE, LNSE
National Category
Applied Mechanics
Research subject
Järnvägsgruppen - Ljud och vibrationer
urn:nbn:se:kth:diva-167114 (URN)978-91-7595-614-5 (ISBN)
Public defence
2015-06-09, Kollegiesalen, Brinellvägen 8, KTH, Stockholm, 12:42 (English)

QC 20150522

Available from: 2015-05-22 Created: 2015-05-21 Last updated: 2015-05-22Bibliographically approved

Open Access in DiVA

fulltext(873 kB)136 downloads
File information
File name FULLTEXT01.pdfFile size 873 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Other links

Publisher's full textScopusConference websiteAIAA

Search in DiVA

By author/editor
Zhou, LinBodén, Hans
By organisation
Competence Center for Gas Exchange (CCGEx)Marcus Wallenberg Laboratory MWLLinné Flow Center, FLOW
Fluid Mechanics and Acoustics

Search outside of DiVA

GoogleGoogle Scholar
Total: 136 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 73 hits
ReferencesLink to record
Permanent link

Direct link