Change search
ReferencesLink to record
Permanent link

Direct link
Energy Storage for a Grid-Connected PV-System: A Feasibility Study
Dalarna University, School of Technology and Business Studies, Mechanical Engineering. Dalarna University, School of Technology and Business Studies, Energy and Environmental Technology.
2013 (English)Independent thesis Advanced level (degree of Master (One Year)), 12 credits / 18 HE creditsStudent thesis
Abstract [en]

The work presented in this thesis concerns the dimensioning of an Energy Storage System (ESS) which will be used as an energy buffer for a grid-connected PV plant. This ESS should help managing the PV plant to inject electricity into the grid according to the requirements of the grid System Operator. It is desired to obtain a final production not below 1300kWh/kWp with a maximum ESS budget of 0.9€/Wp. The PV plant will be sited in Martinique Island and connected to the main grid. This grid is a small one where the perturbations due clouds in the PV generation are not negligible anymore.

A software simulation tool, incorporating a model for the PV-plant production, the ESS and the required injection pattern of electricity into the grid has been developed in MS Excel. This tool has been used to optimize the relevant parameters defining the ESS so that the feed-in of electricity into the grid can be controlled to fulfill the conditions given by the System Operator. The inputs used for this simulation tool are, besides the conditions given by the System Operator on the allowed injection pattern, the production data from a similar PV-plant in a close-by location, and variables for defining the ESS. The PV production data used is from a site with similar climate and weather conditions as for the site on the Martinique Island and hence gives information on the short term insolation variations as well as expected annual electricity production. The ESS capacity and the injected electric energy will be the main figures to compare while doing an economic study of the whole plant. Hence, the Net Present Value, Benefit to Cost method and Pay-back period studies are carried on as dependent of the ESS capacity.

The conclusion of this work is that it is possible to obtain the requested injection pattern by using an ESS. The design of the ESS can be made within an acceptable budget. The capacity of ESS to link with the PV system depends on the priorities of the final output characteristics, and it also depends on which economic parameter that is chosen as a priority.

Place, publisher, year, edition, pages
2013. , 56 p.
Keyword [en]
Solar storage
National Category
Energy Engineering Mechanical Engineering
URN: urn:nbn:se:du-12794OAI: diva2:642696
Available from: 2013-08-23 Created: 2013-08-22 Last updated: 2013-08-23Bibliographically approved

Open Access in DiVA

fulltext(4736 kB)4119 downloads
File information
File name FULLTEXT02.pdfFile size 4736 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Mechanical EngineeringEnergy and Environmental Technology
Energy EngineeringMechanical Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 4119 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 490 hits
ReferencesLink to record
Permanent link

Direct link