Change search
ReferencesLink to record
Permanent link

Direct link
Spectroscopic determination of pH in an arterial line from a Heart-lung machine
KTH, School of Technology and Health (STH).
2013 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesisAlternative title
Spektroskopisk bestämning av pH i en arteriell linje från en hjärt-lungmaskin (Swedish)
Abstract [en]

There is a need for a real-time, non-invasive method to monitor blood pH in a patient line during cardiopulmonary bypass, as today’s methods are both invasive and time consuming. Blood pH is an indicator of physiological and biochemical activity in the body and needs to be kept within a relatively narrow range, typically between 7.35-7.45. A pH value outside this range can be critical for the patient and therefore needs to be carefully monitored throughout the course of cardiopulmonary bypass. In this study the feasibility of using spectroscopic methods for indirect measurement of pH was investigated, and both transmission and reflectance spectroscopy were tested. The results showed that NIR reflectance spectroscopy is a feasible technique for blood pH monitoring during cardiopulmonary bypass. A strong correlation was found between measured pH values and spectral output in the wavelength range 800-930 nm. It was suggested that by means of the statistical partial least square regression method, a model could be created with three regression factors with a cross-validated R2 of 0.906 and a prediction error RMSEP of 0.089 pH units. The results presented here form a foundation for further analysis and experiments with larger sample set and more controlled experimental environment. 

Place, publisher, year, edition, pages
2013. , 58 p.
Trita-STH, 2013:10
Keyword [en]
Spectroscopy, pH, multivariate calibration, heart-and lung machine
National Category
Medical Engineering
URN: urn:nbn:se:kth:diva-121583OAI: diva2:619216
Subject / course
Medical Engineering
Educational program
Master of Science in Engineering - Medical Engineering
2013-03-19, 13:00 (English)
Available from: 2013-05-02 Created: 2013-05-02 Last updated: 2013-05-02Bibliographically approved

Open Access in DiVA

fulltext(10977 kB)501 downloads
File information
File name FULLTEXT01.pdfFile size 10977 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
School of Technology and Health (STH)
Medical Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 501 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 572 hits
ReferencesLink to record
Permanent link

Direct link