A Selective Iodide Ion Sensor Electrode Based on Functionalized ZnO Nanotubes
2013 (English)In: Sensors, ISSN 1424-8220, Vol. 13, no 2, 1984-1997 p.Article in journal (Refereed) Published
In this research work, ZnO nanotubes were fabricated on a gold coated glass substrate through chemical etching by the aqueous chemical growth method. For the first time a nanostructure-based iodide ion selective electrode was developed. The ZnO nanotubes were functionalized with miconazole ion exchanger and the electromotive force (EMF) was measured by the potentiometric method. The iodide ion sensor exhibited a linear response over a wide range of concentrations (1 × 10−6 to 1 × 10−1 M) and excellent sensitivity of –62 ± 1 mV/decade. The detection limit of the proposed sensor was found to be 5 × 10−7 M. The effects of pH, temperature, additive, plasticizer and stabilizer on the potential response of iodide ion selective electrode were also studied. The proposed iodide ion sensor demonstrated a fast response time of less than 5 s and high selectivity against common organic and the inorganic anions. All the obtained results revealed that the iodide ion sensor based on functionalized ZnO nanotubes may be used for the detection of iodide ion in environmental water samples, pharmaceutical products and other real samples.
Place, publisher, year, edition, pages
Basel, Switzerland: MDPI AG , 2013. Vol. 13, no 2, 1984-1997 p.
ion selective electrode, ZnO nanotubes, miconazole nitrate, potentiometric technique, potentiometric titration
Engineering and Technology
IdentifiersURN: urn:nbn:se:liu:diva-90680DOI: 10.3390/s130201984ISI: 000315403300035OAI: oai:DiVA.org:liu-90680DiVA: diva2:614182