Change search
ReferencesLink to record
Permanent link

Direct link
Numerical Simulation Study on Parameters related to Athabasca Bitumen Recovery with SAGD
Norwegian University of Science and Technology, Faculty of Engineering Science and Technology, Department of Petroleum Engineering and Applied Geophysics.
2012 (English)MasteroppgaveStudent thesis
Abstract [en]

The world’s total oil reserves are to some extent dominated by heavy oil. The heavy oil reserves are doubled in volume compared to conventional oil reserves. As conventional oil reservoirs are depleting, heavy oil and bitumen possesses a great potential in covering parts of the future energy demand. The possibility of horizontal drilling has created a pathway for SAGD (Steam Assisted Gravity Drainage), which is the most preferred heavy oil and bitumen recovery method. The mechanism of SAGD involves two parallel horizontal wells, one for production and one for injection. The production well is situated at the bottom of the reservoir and the injection well is placed above. Steam is injected and heats up the oil which is then able to flow to the production well by gravity drainage. In the present thesis, a numerical study of parameters has been performed in relation to SAGD implementation in the Athabasca field. The thermal simulator utilized is CMG STARS. The Athabasca field is located in Northern Alberta in the Western Canada Sedimentary basin. Due to the complexity of core extraction in bitumen reservoirs, a comprehensive sensitivity analysis is significant in order to determine the appropriate production approach. The present study confirmed that a decrease in viscosity and increase in porosity yielded higher oil recoveries. All oil recoveries found in 3D simulations were within model uncertainties compared to the 2D result. Increase in horizontal and vertical permeabilities resulted in higher oil recovery up to a certain limit, where exceeding permeabilities provided limited increase in oil recovery. The effect of different vertical well spacing proved to have minor effect on amount of oil produced. Yet, based on cumulative steam oil ratio (CSOR) it was proposed to maintain a vertical well spacing in the range of 3.5 to 7 meters.

Place, publisher, year, edition, pages
Institutt for petroleumsteknologi og anvendt geofysikk , 2012. , 120 p.
Keyword [no]
ntnudaim:7243, MTGEOP Geofag og petroleumsteknologi, Reservoarteknologi
URN: urn:nbn:no:ntnu:diva-19302Local ID: ntnudaim:7243OAI: diva2:566934
Available from: 2012-11-11 Created: 2012-11-10 Last updated: 2013-06-12Bibliographically approved

Open Access in DiVA

fulltext(6273 kB)2153 downloads
File information
File name FULLTEXT01.pdfFile size 6273 kBChecksum SHA-512
Type fulltextMimetype application/pdf
cover(184 kB)22 downloads
File information
File name COVER01.pdfFile size 184 kBChecksum SHA-512
Type coverMimetype application/pdf

By organisation
Department of Petroleum Engineering and Applied Geophysics

Search outside of DiVA

GoogleGoogle Scholar
Total: 2153 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 176 hits
ReferencesLink to record
Permanent link

Direct link