Change search
ReferencesLink to record
Permanent link

Direct link
Experimental analysis of variable capacity heat pump system equipped with vapour injection and permanent magnet motor
KTH, School of Industrial Engineering and Management (ITM), Energy Technology, Applied Thermodynamics and Refrigeration.
2012 (English)Independent thesis Advanced level (degree of Master (Two Years)), 80 credits / 120 HE creditsStudent thesis
Abstract [en]

This study analyzes the performance of variable capacity heat pump scroll compressor which is equipped with vapour injection and permanent magnet motor. Refrigerant used in the system is R410A. The study is divided in two phases. In first phase, tests are carried out for heat pump without vapour injection. Heat pump’s performance including COPs, heating/cooling capacities, inverter losses, heat transfer behaviour in condenser/evaporator are analyzed.

Inverter losses increase but the ratio of inverter losses to the total compressor power decreases with increase in compressor speed. Electromechanical losses of compressor are much higher than the inverter losses and so make most part of the total compressor losses (summation of inverter and electromechanical losses).

In second phase benefits of vapour injection are analyzed. For vapour injection, heat pump’s performance is evaluated for two different refrigerant charges: 1.15kg and 1.28kg. It is noted that heat pump performs better for refrigerant charge 1.15kg even at lower compressor speeds as compared to refrigerant charge 1.28kg. For refrigerant charge 1.15kg, heat pump COP cool with vapour injection increases by an average of 10.66%, while COP heat increases by an average of 9.4%, at each compressor speed except for 30Hz, as compared to conventional heat pump cycle with no vapour injection. Similarly refrigerant temperature at outlet of compressor also reduces with vapour injection which leads to the better performance of heat pump.

Place, publisher, year, edition, pages
2012. , 79 p.
Keyword [en]
heat pump, variable capacity, scroll compressor, vapour injection, permanent magnet motor, R410A
National Category
Energy Engineering
URN: urn:nbn:se:kth:diva-104579OAI: diva2:565195
Subject / course
Energy Technology
Educational program
Master of Science - Innovative Sustainable Energy Engineering
2012-09-28, ETT library, Brinellvägen 68, Stockholm, 09:00 (English)
Available from: 2012-11-07 Created: 2012-11-06 Last updated: 2012-11-07Bibliographically approved

Open Access in DiVA

Awan Umer Khalid EGI-2012-104MSC(1409 kB)10662 downloads
File information
File name FULLTEXT01.pdfFile size 1409 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Awan, Umer Khalid
By organisation
Applied Thermodynamics and Refrigeration
Energy Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 10662 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 691 hits
ReferencesLink to record
Permanent link

Direct link