Flight pro le support on simulators
Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
This paper deals with the adaptation of a flight-test tool on A350 simulators in order to support a flight profile. This adaptation has been performed by doing first, an anal- ysis of the current situation of the existing tool on old programs like the A320 or the A330. Then, several modifications on the tool have been performed in order to adapt this tool on simulators. Finally, the validation of this tool has been done by performing several tests on A350 simulators. The difficulty of this adaptation was due to the appari- tion of new state-of-the-art technologies. The main improvement concerned the signals technology that appeared from the A380. Therefore, a modification on the parameters acquisition process has been done to take into account these improvements. Finally, the implementation of this mock-up on A350 simulators consists in a feasibility study that enables simulator test engineers to automate the tests performed on simulators and to do a traceability of these tests. The realisation of this mock-up is necessary because the simulator test engineers need this tool for the end of 2012 in order to develop the A350 whereas the real evolution of this tool will be done when the real aircraft A350 will be produced in 2014.
Place, publisher, year, edition, pages
2012. , 11 p.
Trita-AVE, ISSN 1651-7660 ; 2012: 37
IdentifiersURN: urn:nbn:se:kth:diva-101926OAI: oai:DiVA.org:kth-101926DiVA: diva2:549870
Subject / course