Change search
ReferencesLink to record
Permanent link

Direct link
Energy efficiency in rotating equipment
KTH, School of Engineering Sciences (SCI), Aeronautical and Vehicle Engineering, Naval Systems.
2012 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

This paper reports the findings of the first stage of a study on how the efficiency of a centrifugal pump depends on the eccentricity of the impeller (rotor). The geometry of the pump is based on the ERCOFTAC centrifugal pump that has been used to validate computational fluid dynamics software with laboratory measurements. The pump is modelled using the CFD-code Comsol multi physics (tm) in order to get the pressure and velocity field. From the pressure and velocity field the efficiency and output power for the pump is calculated. The energy efficiency of the same pump with different static eccentricities is then compared, showing the effect of eccentricity To validate the CFD-model the velocity and pressure field for the pump is compared to results from another simulation of the same pump and an experiment. The comparison shows that the results are comparable and shows good agreement with experimental data. It is showed that the energy losses of the pump increase with increased static eccentricity of the impeller. The losses at 10% eccentricity are about 0.5% of the produced energy. The main contribution to the losses is the introduced asymmetry, eccentricity, of the pump, which causes an unsteady flow and also increases the total unbalance force on the rotor. It is further noted that rotor-stator interactions of the impeller and the stator blades have small influence on the energy losses. It is concluded that rotordynamic design can improve the energy efficiency of the process that the rotating equipment is involved in. Further research is suggested on whirling eccentric motion, experimental verification and more detailed simulation models.

Place, publisher, year, edition, pages
2012. , 19 p.
Trita-AVE, ISSN 1651-7660 ; 2012: 33
National Category
Other Mechanical Engineering
URN: urn:nbn:se:kth:diva-101905OAI: diva2:549815
Subject / course
Naval Systems
Available from: 2012-09-05 Created: 2012-09-05 Last updated: 2012-09-05Bibliographically approved

Open Access in DiVA

fulltext(1200 kB)2478 downloads
File information
File name FULLTEXT01.pdfFile size 1200 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Naval Systems
Other Mechanical Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 2478 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 354 hits
ReferencesLink to record
Permanent link

Direct link